My daughter's old County has some that the PO added.
Will try and remember to take a couple of photos tonight.
Steve
Good evening all,
Has anybody put foot well vents into a 110, or have photos of it done? I believe the Perentie SRV has some sort of vent? Whenever I drive the FJ45 (or even the 240 GL Volvo!) I think how good would it be to have these in the Landy.
Thank you,
Edward
My daughter's old County has some that the PO added.
Will try and remember to take a couple of photos tonight.
Steve
1985 County - Isuzu 4bd1 with HX30W turbo, LT95, 255/85-16 KM2's
1988 120 with rust and potential
1999 300tdi 130 single cab - "stock as bro"
2003 D2a Td5 - the boss's daily drive
While the RFSV has them, they are to some extent blanked off by the barwork.
That would have been a great idea for the Tdci when they blocked off the front air vents.
We watch with interest as I would retro fit some in if possible.
I saved these a while back from an unknown source (apologies to the photo taker if you're out there).
outside-a.jpg
outside-b.jpg
inside-a.jpg
They work to some extent on the FJ40/45, where the vent is protected by the front mudguard, but on a Landrover they will direct the dust off the front wheel straight into the cab. Probably OK if you do most of your driving on bitumen.
John
JDNSW
1986 110 County 3.9 diesel
1970 2a 109 2.25 petrol
Thank you Dervish. Those vents look almost exactly the same as vents that i see on the side of stock trailers.
this one?
http://www.mcnaughtans.com.au/images...-003_large.jpg
Don.
Search AULRO.com ONLY! |
Search All the Web! |
---|
|
|
Bookmarks