Page 2 of 2 FirstFirst 12
Results 11 to 15 of 15

Thread: Tutorial - Replacing the bearing in a 300TDi airconditioning compressor pulley.

  1. #11
    Join Date
    Sep 2010
    Location
    The Hills.
    Posts
    15,786
    Total Downloaded
    0
    Just doing this now. On mine there are no shims. However, there is this:

    IMG_7647.jpg

    which is some sort of spacer.

    I gather the step where you turn on the ignition is to lock the clutch so that you can undo the bolt against belt tension; No good on mine as it keeps shredding belts, which is why I'm doing the bearing.

    So, I used one of these;

    IMG_9121.jpg

    This is the new bearing number, as a couple of others have posted;

    IMG_0322.jpg

    Sorry, not as clear as I'd hoped.

    And this is the new bearing, with the old;

    IMG_4568.jpg

    All pretty straightforward, except mine was rusted together a bit. Care needs to be taken taking the front plate thingy off. A puller would be best, buy I don't have one that fits, so careful levering works, but it's best to lever on the plate, not the pulley, as there is soft material on the pulley you can damage.

    Thanks Dave for this. Putting mine back tomorrow, just picked up my belt from Mario.
    ​JayTee

    Nullus Anxietus

    ​Getting involved in discussions is the best way to learn.

    2000 D2 TD5 Auto: Tins
    1994 D1 300TDi Manual: Dave
    1980 SIII Petrol Tray: Doris
    OKApotamus #74
    Nanocom, D2 TD5 only.

  2. #12
    Join Date
    Sep 2010
    Location
    The Hills.
    Posts
    15,786
    Total Downloaded
    0
    Hmm. Might take me a while to get used to posting pics...
    ​JayTee

    Nullus Anxietus

    ​Getting involved in discussions is the best way to learn.

    2000 D2 TD5 Auto: Tins
    1994 D1 300TDi Manual: Dave
    1980 SIII Petrol Tray: Doris
    OKApotamus #74
    Nanocom, D2 TD5 only.

  3. #13
    chiptech Guest

    Thanks

    Thanks. Handy tutorial and saved me lots of money.

  4. #14
    Join Date
    Jul 2021
    Location
    Blue Mountains
    Posts
    2
    Total Downloaded
    0

    Update to Bearing number

    Hello. I had to do this this week, but could not find the bearing under the numbers in the thread. After some calling around, I found (and used) 30BG5222-2DSE.

    The website bearingsdirect.com has this information:
    30BG05S2G-2DS bearing is Precision A/C Compressor Double Row Ball Bearing Both Sides Rubber Sealed and pre-lubricated with Grease. Sizes: ID 30mm x OD 52mm x W 22mm
    Match#: 30BG05S2G-2DS ,30BGS10DST2, DAC30520022, DAC3052-32RD, 30BGS10G, 30BG5222UUS, 30BGS10G2DST2, 30BD5222DUUM6, 30BG05S2G2DS, 30BG52222DSE, 30BGS10G2DST2F, DAC305232RR9XS, 9491004570, 9491004760, 51802600

    I have attached a couple of photos to show:
    - Where the washers are found as you disassemble.
    - The parts laid out in order of removal.
    Attached Images Attached Images

  5. #15
    Join Date
    Jan 1970
    Location
    Brisbane
    Posts
    1,652
    Total Downloaded
    0
    Thank you for listing the part numbers.. That is very useful
    Andrew
    1998 Landrover Defender 300Tdi 130 HCPU Expedition
    1972 Peugeot 504 Sedan - Daily Driver

Page 2 of 2 FirstFirst 12

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!