Printable View
Well havent done much last few weeks way to busy with work, But picked up the C44F custom front bar which i love come up perfect:D
Fitted it temp and put some of the front back on for a few pics
https://www.aulro.com/afvb/images/im...007/05/269.jpg
https://www.aulro.com/afvb/images/im.../2007/05/5.jpg
https://www.aulro.com/afvb/images/im.../2007/05/6.jpg
Well havent done to much for awhile as i sold my Pajero and had to buy a car for the wife, But have stripped the rangie and started sanding and cutting guards and hopefully in the next month or so she will have a new coat of Vintage red..:D
Looks great mate, Bit of wet dry and a buff should come up A1
Looks **** hot!! Love that red!! Will make it go fast you know!!
When you are done you can come over and paint my UTE!!
You etch primed all the bald bits first I hope:eek:
Thanks Mate, Not to bad for a first timer, And i could But I'm about 1800 klms away:oQuote:
Originally Posted by mickrangie
I read up on it first, And made sure i did, I think thats why the old paint was so Sh*t, I don't think they primed it right.Quote:
Originally Posted by rovercare
I just read this whole thread, and gotta say, you have done a fantstic job so far. I like the black carpets, where you get them from, just any carpet shop, or an autoshop? Also, where did you get the rubber flares from? Im planning on putting bigger rubber on mine (33 12.5 15) so ill be needing to cut guards and put flares.
Good work, keep the pictures coming, they are inspirational ;)
Thanks mate, The carpet is marine carpet which i cut to size and used a heat gun to mould to the Ranige then used Quik grip to hold it down.Quote:
Originally Posted by stooge
I run 33's and bought some 75mm rubber flares which i got from TJM for arounf $80 for a 6 meter roll.
You are inspirational! You've done a great job, I'm taking lots of notes.
And yeah, it'll definitely go faster coz it's red :p