D2 Disc Hubs for my camper

Quote:

---

Originally Posted by Redback

Maybe if you left it [hilift] in the car, you wouldn't forget it:rolleyes:

---

Not much point - I can't use it on the P38A. :(

Wait on, with the Kaymar rear bar, maybe I could!

Ron

Yep, the VE commodore has a different PCD to all other Commodore models.
Coulnd't tell you what it is though.

Quote:

---

Originally Posted by p38arover

Not much point - I can't use it on the P38A. :(

Wait on, with the Kaymar rear bar, maybe I could!

Ron

---

Yes you can Ron, the Kaymar has hilift jacking points.

Quote:

---

Originally Posted by strangy

Yep, the VE commodore has a different PCD to all other Commodore models.
Coulnd't tell you what it is though.

---

We have VEs at work, i'll check them out.

Wheel warning for Commodore

The Drive Team, The Sydney Morning Herald, 15/12/06





Holden has told its dealers that the new VE model's wheels won't fit old Commodores.

https://www.aulro.com/afvb/images/im...2007/09/82.jpg

Holden VE Commodore: production line at the Elizabeth factory in Adelaide.

When Holden introduced the all-new VE Commodore in August it changed some crucial dimensions of the wheel-locating system. This was done to avoid confusion on the production line (as the Holden factory will be building both new and old models for some time yet) and to cope with the new Commodore's extra weight, width and grip levels.
Holden sent the following statement to Drive on Wednesday: "Fitting VE wheels onto a VZ [or earlier model Commodore] is not recommended or condoned by GM Holden as it raises some safety concerns as there are two major differences in the wheels."
Holden said the VE Commodore has 14mm wheel studs and earlier Commodores have 12mm wheel studs.
"If a VE wheel were fitted onto a VZ [or earlier model Commodore] there is a concern that there would not be enough bearing area under the retention nut on the aluminium wheel, which, worse case scenario, means the wheel could potentially fall off."

Quote:

---

Originally Posted by Pedro_The_Swift

Wheel warning for Commodore

The Drive Team, The Sydney Morning Herald, 15/12/06






Holden has told its dealers that the new VE model's wheels won't fit old Commodores.



https://www.aulro.com/afvb/images/im...2007/09/82.jpg

Holden VE Commodore: production line at the Elizabeth factory in Adelaide.

When Holden introduced the all-new VE Commodore in August it changed some crucial dimensions of the wheel-locating system. This was done to avoid confusion on the production line (as the Holden factory will be building both new and old models for some time yet) and to cope with the new Commodore's extra weight, width and grip levels.
Holden sent the following statement to Drive on Wednesday: "Fitting VE wheels onto a VZ [or earlier model Commodore] is not recommended or condoned by GM Holden as it raises some safety concerns as there are two major differences in the wheels."
Holden said the VE Commodore has 14mm wheel studs and earlier Commodores have 12mm wheel studs.
"If a VE wheel were fitted onto a VZ [or earlier model Commodore] there is a concern that there would not be enough bearing area under the retention nut on the aluminium wheel, which, worse case scenario, means the wheel could potentially fall off."

---

Aaaaarrrr so it's only the wheel stud that is different, basicly it's the same as the Disco, i wonder if the thread pitch is the same:unsure::unsure:

I had a look at the rims on the VE at work yesterday and they look as if they have the same offset as the Disco steel rims.

Might do a trial fitting one day, they are 16s too.

Baz.

The 14mm stud matches the disco wheel nut also doesn't it?

Quote:

---

Originally Posted by p38arover

Not much point - I can't use it on the P38A. :(

Wait on, with the Kaymar rear bar, maybe I could!

Ron

---

are you saying that you can get a kaymar rear bumper for a rangerover p38????

Quote:

---

Originally Posted by bushytas

are you saying that you can get a kaymar rear bumper for a rangerover p38????

---

Not any more. But mine has one.

This is my car: http://www.rangerovers.net/outfittin...mp.html#kaymar

Ron

Sorry for my ignorance on this, but in summary, does this mean that if I fit VE hubs to my trailer, I can use D2 wheels??

W