The length of the bearing is not that critical as there is plenty of room behind the cover. The jd bearing protrudes about 5mm. What is critical is the measurement from the front face of the cover to the front face of the flange as this will locate the pulley and therefore the belt alignment.
Just be carefull to not apply too much force to the original flange as they are cast and will break if you look at it funny.
'95 Defender 130 Single Cab
HS2.8 TGV Powered
------------
98% of all Land Rovers built are still on the road.
The other 2% made it home.
Cost difference between Britpart and Genuine seals: £2.04. Knowing that your brakes won't fail at any moment: Priceless.
Bookmarks