Stooge's D1 Brush Bar install

Looks good, Give me a call. We are all sick at the moment so no chance of a dinner etc:(


JC

Yes its coming along nicely 2_door...

Sorry to hear you all sick, but thats how it goes! Mind you, get it now, over and done with ready for the good weather :)

I got the brakets made up from an engineering shop out of 10mm plate. Not a bad job, paid $120 for the pair.

So pictures tell the story of what I did today:

https://www.aulro.com/afvb/images/im...2009/10/20.jpg

https://www.aulro.com/afvb/images/im...2009/10/21.jpg

https://www.aulro.com/afvb/images/im...2009/10/22.jpg

https://www.aulro.com/afvb/images/im...2009/10/23.jpg

https://www.aulro.com/afvb/images/im...2009/10/24.jpg

https://www.aulro.com/afvb/images/im...2009/10/25.jpg

https://www.aulro.com/afvb/images/im...2009/10/26.jpg

So overall happy with it, paint is the usual KillRust brand that I have used many a times in the past.

Will be putting another coat on and then pop it on the Disco, and finish the spotlight install :) :)

Then she's all done!!

Looking excellent, will it be on today or tomorrow?

JC

Ill put it on next weekend to give me another chance to recoat. Re-coat times are 16 hours apart :(

Finally finished the bar, although I did stuff it up on the paint job as I can see lots of smeared paint... but thats what happens when you got no room!! :(

So here is the final pics, with spotties on but not wired in... will do over weekend :)

https://www.aulro.com/afvb/images/im...09/11/1185.jpg

https://www.aulro.com/afvb/images/im...09/11/1186.jpg

https://www.aulro.com/afvb/images/im...09/11/1187.jpg

https://www.aulro.com/afvb/images/im...09/11/1188.jpg

https://www.aulro.com/afvb/images/im...09/11/1189.jpg

https://www.aulro.com/afvb/images/im...09/11/1190.jpg

https://www.aulro.com/afvb/images/im...09/11/1191.jpg

https://www.aulro.com/afvb/images/im...09/11/1192.jpg

looks good Carlos.

are those larger holes to be used as recovery points :confused:

Yep they are the recovery points to replace the existing ones I have. It wont be an issue with 10mm plate!

Nice work there:cool:

Can't beleive they charged you 120 for them thought:(

When I get there I will hopefully get done there and have a look for myself:D

So if any of you tassie blokes needs some plates cut let me know and I will see what I can do:angel:

Adam

Thanks for the offer Adam. Yeah it was a bit more than I thought, and JustinC had offered to cut some for me, but the bloke is waaaaaay to busy running a business so I thought ill just leave him alone :D

Let us know when your traveling down south mate ;)