Well Ive been holding back watching this thread and you guys have done a great job.
TOP JOB look forward to seeing more pics of albino:)
Printable View
Well Ive been holding back watching this thread and you guys have done a great job.
TOP JOB look forward to seeing more pics of albino:)
Quote:
Originally Posted by samuelclarke
I bought these lights from an Ebay seller "brightlightautoparts"
Factory 2/31 Amay Cres Ferntree Gully, Vic 3156
Phone Number 03-9758-1122
There are however many other competative sellers on Ebay. The ones we chose came without globes as we installed a HID upgrade
Erich
Quote:
Originally Posted by dobbo
This was taken a few days ago. I will try to get some rear shots for you tomorrow.
https://www.aulro.com/afvb/
We hope to leave early Saturday 21st November in 1 weeks time. There has already been some rain to the north west of Gapuwiyak. Will PM you tomorrow RE out movements in the next week.
Erich
Last few days we:
Completed the rear camera. We will probably remove the rear view mirror as it served little purpose
http://img9.imageshack.us/img9/741/nov12032.jpg
Leanne almost completed the tray cover - lower tie downs are still to be installed
We completed the tray, bolting on all the bits, pocket covers, flares, ...
Almost completed the painting
Completed the auxillary sill fuel tank installation and filled it with 65 litres - not completely full as I was checking for leaks - all good
Took the car back to the spring supplier as one of the rear springs popped out during flex testing. They had supplied too long shocks and replaced them with the correct ones there and then
We replaced the bushes in the front trailing arms and half way through replacing the front unis
Replaced the front pinion seal. Andrew found a good use for an EGR - the perfect size in diameter and width to install the seal.
http://img9.imageshack.us/img9/2118/nov12045.jpg
Erich
The rear spring popping out is now fixed. We went back down to ultimate and they swapped the rear shocks for some 30mm shorter ones.
https://www.aulro.com/afvb/images/im...009/11/747.jpg
I found a solution to the wheels sticking out one side more than another. Instead of stuffing around with a custom one adjustable panhard, I just moved the mount on the diff over 6mm, which made it equeal on both sides.
https://www.aulro.com/afvb/images/im...009/11/748.jpg
https://www.aulro.com/afvb/images/im...009/11/749.jpg
https://www.aulro.com/afvb/images/im...009/11/750.jpg
https://www.aulro.com/afvb/images/im...009/11/751.jpg
pics of the rear pockets and flairs.
https://www.aulro.com/afvb/images/im...009/11/752.jpg
Finished at 11pm. Will be back tomorrow morning.
That thing is a work of art!!! Especially the tray!
A bit too "albino" for me, but I am sure I could live with it if it was a gift.... ;)
Like.
Want.
:D
Absolutely top job, congrats to all concerned. There wouldn't be too many people who now have such a comprehensive record of their car being built, that's a bonus.:clap2:
Another point that has not gone un-noticed, your daughter is a very lucky girl to have such a caring family, but then I guess she already knows that.
Cheers
Mick
Quote:
Originally Posted by midal
Yes, but there is more.
My nephews or Sharon's cousins is building a quad bike trailer, Land Rover wheels, shocks, .... which we will be towing up. Yes, we do have a close and caring family.
Erich
I suppose the trailer is an albino also :DQuote:
Originally Posted by Bundalene
I hope the test run and trip north go well and you both get time to relax after all your stirling efforts - well done. :BigThumb: