Originally Posted by
nod 130
I haven't seen an aldi one , but tirfors are dead easy to use. unless yours is a very different shape from a genuine tirfor or an Australian Anchor super til or any of the other common ones, you thread/push the cable through the body at the blunt end, till it emerges from the other end and slides freely through. This is after youv'e dissengaged the rope clutch by pulling the 'y' shaped lever as if you're trying to pull it out of the body. When pulled hard enough it will latch into a little notch you can usually see. Once the rope is through and far enough for your purpose, knock the rope clutch lever out of the notch and it will grip the rope. Now you can move the rope through the body by using the extendable handle on either of the other levers. one for forward,and one for reverse. Usually the forward direction handle is more robust than the other.To get the rope out when the job is done and the cable has no load on it, pull the rope clutch lever to dissengage it again. If you practice with it beforehand hooked up between a couple of vehicles you'll soon get it right. Good luck with it, they're very handy.Don