Hydraulic Winch

Hi,
a friend has one of these Ox winches from TJM.
We had a club day when all the winches were played with, PTO, electric, hydraulic, hand powered.

The hydraulic was certainly slower than the electrics, but it didn't need to wait to cool down (like the Tirfor) and could pull continuously without any dramas.

cheers

the TJM Ox hyd is a rebadged Mile Maker. Your mates PS pump probably flows about 6ltr/min.....now put a real pump in and flow 10x that for 10x the line speed ;)

Quote:

---

Originally Posted by uninformed

There are a few differences though. Are those Thomas and Ramsey of yours worm wheel type with a hyd motor fitted to the drive shaft instead of it being pto shaft driven? The most common hyd winches are planetry gear train. I would be interested in knowing the gear ratio on the 2 you have and what line speed they are at what flow rate. What pressure do they run at?

---

The Ramsey is planetary and the Thomas is worm wheel.
I will try and dig up the specs later.

Quote:

---

Originally Posted by uninformed

umm....Im confused, you know the exact components but you want more exact details :confused: tell me what you want to know............

---

Sorry for the confusion, I am after the following:

• The brand and part number of the 12volt solenoid control valve
• Ditto for the 12volt remote handpiece

Regards
Maggsie

here are pics of my Solinoide control valve and my remote hand piece. Im sure your Hyd guy can sorce something for these.

Thanks for the info and pics!
Regards
Maggsie
2010 Defender 110