Page 2 of 2 FirstFirst 12
Results 11 to 15 of 15

Thread: D2 rescues 2 4x4 from the sand

  1. #11
    Join Date
    Jan 1970
    Location
    Gold Coast
    Posts
    5,101
    Total Downloaded
    0
    Quote Originally Posted by scarry View Post
    Weight was definitely an issue,and the little 2.6 wasn't known for its power,only for its thirst,and burning valves as it aged.

    In fact some preferred the smaller engine.

    The bigger the vehicle,the more gear can be loaded into it.

    I remember spare axles were part of the repair kit kept in each vehicle,but i can't remember one ever being used.



    Here is an old pic of one.I am guessing it is early to mid '70's model.
    These were fitted with three fuel tanks,and some also had a stainless water tank in the rear as well.
    Some also had bars each side running from the front bar to above the windscreen,we used to call them 'scrub bars'.Very handy as the tracks in those days were overgrown.

    A relatively new one was drowned up there and it was then called the 'yellow submarine'.
    It was repaired by Annand and Thompson,not like todays vehicles which would have been an instant write off.



    Edit,geez it would be nice to have one in this condition today..
    Cant see the pic mate?

    I loved my SIII swb truck cab, had some great fun in it. But the only Series I could own these days is a SI I like the 86" SWB. Other than that, coil sprung is just so much better in so many areas IMO, and lets face it, by todays standards a 300Tdi is pretty old school lol.

    One thing id like to note, and hear commented on, is the sand type from east to west coast. One member here a while ago told me about the sand on the west coast being a lot softer and dryer. He grew up on the east coast and very familiar with it from experience. He now resides in WA

  2. #12
    Join Date
    Feb 2007
    Location
    Perth
    Posts
    3,800
    Total Downloaded
    0
    Quote Originally Posted by uninformed View Post
    ...One member here a while ago told me about the sand on the west coast being a lot softer and dryer. He grew up on the east coast and very familiar with it from experience. He now resides in WA
    That has been my experience also ~40 years on the east coast and ~20 years on the west coast.

    The west coast sand tends to be much softer and powder like than the east sand in the hot, dry WA environment.
    2011 D4 3.0 SDV6
    1999 D2 V8, in heaven
    1984 RRC, in hell

  3. #13
    Join Date
    Sep 2010
    Location
    The Hills.
    Posts
    15,642
    Total Downloaded
    0
    Quote Originally Posted by Ferret View Post
    That has been my experience also ~40 years on the east coast and ~20 years on the west coast.

    The west coast sand tends to be much softer and powder like than the east sand in the hot, dry WA environment.
    Someone here pointed out that E coast sand, or more specifically Qld sand, is harder due to the coral component. Now, I'm no geologist, but I do know that coral is hard, so maybe there's something in what he said.
    ​JayTee

    Nullus Anxietus

    ​Getting involved in discussions is the best way to learn.

    2000 D2 TD5 Auto: Tins
    1994 D1 300TDi Manual: Dave
    1980 SIII Petrol Tray: Doris
    OKApotamus #74
    Nanocom, D2 TD5 only.

  4. #14
    Join Date
    Jan 1970
    Location
    Gold Coast
    Posts
    5,101
    Total Downloaded
    0
    Quote Originally Posted by Ferret View Post
    That has been my experience also ~40 years on the east coast and ~20 years on the west coast.

    The west coast sand tends to be much softer and powder like than the east sand in the hot, dry WA environment.
    The first time I went to Fraser Isl in my 110, i drove for 2 days at 38 PSi on 750x16 XZLs. I did this on purpose to get a feel of the difference when I dropped down to ~24 PSi. I did not get bogged once and even did some heavy braking in the softer stuff to dig in. This all on the eastern side. I went from Inskip and spent a week camping and moving along to the northern most NP camp ground. Never did the tip as no recvery gear and traveling solo.

    Id say that pretty easy work by sand standards

  5. #15
    Join Date
    Apr 2008
    Location
    Brisbane,some of the time.
    Posts
    13,622
    Total Downloaded
    0
    Quote Originally Posted by uninformed View Post
    The first time I went to Fraser Isl in my 110, i drove for 2 days at 38 PSi on 750x16 XZLs. I did this on purpose to get a feel of the difference when I dropped down to ~24 PSi. I did not get bogged once and even did some heavy braking in the softer stuff to dig in. This all on the eastern side. I went from Inskip and spent a week camping and moving along to the northern most NP camp ground. Never did the tip as no recvery gear and traveling solo.

    Id say that pretty easy work by sand standards
    That pic should be there now.

    Softness of dryish sand depends on the moisture content.
    I have seen very very soft sand here in Qld,usually if it hasn't rained for a couple of months and it has been hot.
    In winter the sand moisture content seems to stay higher for longer after rain.

    But then there is also the quicksand down near the water,that is very very soft,and can easily catch a driver out.
    That is sand that is saturated with water.

    Back to the vid,that sand didn't look very soft,but it could be just the way it looks in the vid.
    Paul

    D2,D2,D2a,D4,'09 Defender 110(sons), all moved on.

    '56 S1,been in the family since...'56
    Comes out of hibernation every few months for a run

Page 2 of 2 FirstFirst 12

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!