where to get springs

Quote:

---

Originally Posted by Lotz-A-Landies

A 1953 uses the basically same springs as the rest of series 1 86"/88" and SII 88" petrol (without capstan winch) so you can use just about any 88" spring, if the ride is too hard remove a leaf.

With shock absorbers, the eyes at the end are smaller than the later S1 and SII/SIIa/SIII so make sure you are being quoted for 1951-1953 80" springs.

---

Note thats only for the front road springs, the rear still use the narrow springs on all 80" Landys thats 48 to 53. :D