okay back to the topic where would be the best place for engine parts by best i mean quality,cheapest,good to deal with.
also with warn axles can you get them built up and machined?
if so by who?needs to be close
Printable View
okay back to the topic where would be the best place for engine parts by best i mean quality,cheapest,good to deal with.
also with warn axles can you get them built up and machined?
if so by who?needs to be close
You can try the mob with the catalogues in Melbourne that you like.Quote:
Originally Posted by schmierer LR at singleton
After that it is Dunsfold's, John Craddock or P.A. Blanchard in the U.K.
Some parts you will find next to impossible to find. For those you need to go to Ian Cox from Cox N Turner engineering in the U.K.
what sort of parts will i find hard to get?
i just want to know what i might be in for
Replacement cam shafts, oversize pistons, ring gear, some of the bearing shell sizes and same with rings.Quote:
Originally Posted by schmierer LR at singleton
Addit Just looked at your earlier post re: axles. Very few people do metal spraying these days. If it is a semi floating axle you have and don't have one of the very early 80" (which you want to keep very original) all the semi floating axles are interchangeable with each other. Your best bet is to look for a good second hand pair from wrecks.
well lets hope i dont need to bore it out then