will this part fit ?

(Thanks Series1Buff)

re: Indian SOLEX I have discovered its a relatively easy job to drill and tap a 6mm hole for the vacuum advance fitting on the carby side.. there is a brass plug provided for the fitting .

I read up on the original Lucas dissy specs . On the original 1954 dissy 0n my 2 litre , the mechanical advance doesn't kick in until 1500 revs, so its very necessary to have the vacuum advance working to achieve the zoom aspect from take off.

MIKE

************************************************** *
fix

--------------------------------------------------------------------------The saga continues , but now all sorted. I found the correct location for the vacuum port . You can see where they made a spot for it , in the casting . I carefully drilled a 2mm hole and it came out just above the throttle butterfly ....

The following happens : As the butterfly opens slightly from the idling position, it exposes the vacuum line port to the distributor, pulling the advance around . In the idling situation, the butterfly is closed and the vacuum port isn't exposed and the timing is retarded, this is also important for a static hand crank starting situation , broken fingers e.g.

MIKE

referring to front indicators on series 1.

Quote:

---

Originally Posted by back_in

Hi All
The fronts are a twin mini globe in a twin socket available through Tony Pearson (Classic Globes) cars before 1960 something had white front indicator lamps the other element is the parking light.

the rear ones must be orange, nothing will work through a red lens and show orange.

You can not show a white light at the rear of a vehicle, must be orange.
The rear is a orange classic type also from the above it mounts flat, only 2 mounting holes and a small hole and grommet for the wire.

He also has period reflectors, look the same as the original as used on L/R
cheers
Ian

---

referring to everything!

Quote:

---

Originally Posted by series1buff

lots of info here : http://www.series123.com/repairs_B.html

---

great catalogue, has all sorts of bits, including "flat backed" domed indicators that look ideal for a S1. (in my humble opinion) also indicator arms etc etc etc

Quote:

---

Originally Posted by chazza

I have been looking through the catalogue from this business

Car Builder Solutions Ltd. Kit car parts. Spares and accessories for the car builder enthusiast.

They have a "period" type indicator switch, which might be suitable. For me the solution of where to put it on an 80" is the biggest hurdle,

Cheers Charlie

---

Good thread re: fuels to use and tips for same

http://www.aulro.com/afvb/series-i-l...-unleaded.html

we put one of these on a 24 garford firetruck (6v) and it eliminates need for 'flasher cans' etc in wiring... runs @ 20 secs as it winds back to centre, during this 'points' in the set open and close (hence the blinking as required!) works up to 12v too

works well, can be mounted through a panel..

mechanical flasher unit :: Vintage Car Parts

cheers
digger