Trying to find a 1948 side plate engine head

Quote:

---

Originally Posted by Lotz-A-Landies

Hi Ian

Good to see you're still looking in! :)

We have only acquired the one 1948 head in recent times and that is being fitted to the 860159 engine. But will keep an eye out.

Diana

---

What will this engine be going in? a genuine 48 model?

Quote:

---

Originally Posted by Lotz-A-Landies

Wot

Like this one?

https://www.aulro.com/afvb/images/im...12/10/1049.jpg

Just get an angle grinder and remove the lip off a later head! ;)

---

Umm are those manifold clamps the wrong way around?:o

I have a 1.6 motor (bottom end only) down the back shed somewhere.
Could someone explain, or post a picture of the 'side-plate' engine. I'll take a guess and say that there is a plate on the side.....

Mine came with another vehicle, the pistons have holes from pre-ignition but the block, crank & rods may be OK.



Colin

Quote:

---

Originally Posted by tom the pom

What will this engine be going in? a genuine 48 model?

---

Hi Tom,

How's things going?

Yes, engine 860159 is from R860137 (first Land Rover actually "sold" in NSW to a buyer on 31 December 1948). Unfortunately I think I only have the front differential casing (no 2), a replacement long-nosed differential, wheels, and some other components from that vehicle - the rest appears to have been lost.

Until I have the time next year all the 1948 parts I have will, for the moment, be put into a very interesting early 1949 chassis R8664773 (build no 4785) just to get all my 1948 bits together as a display. This chassis is in absolutely amazing condition and is on the chassis colour changeover - it is silver overpainted light green. In the meantime other pre-1500 1948 chassis components I have acquired will be used in the build-up of a pre-1500 chassis for the eventual rebuild.

Have a very damaged firewall from a pre-1000 vehicle that will be repaired, the pre-750 windscreen frame rebuild is coming along slowly, have the replica seat box that GD brought from Perth to Cooma 2008 for me weathering so the rebuild is still moving V E R Y S L O W L Y.

Have not been able to do much over the past 18 months with the Series Ones.

Good to see you are still looking in here.

Bob

Quote:

---

Originally Posted by gromit

<snip>
Could someone explain, or post a picture of the 'side-plate' engine. I'll take a guess and say that there is a plate on the side.....
<snip>
Colin

---

Hi colin

Its all in the core plugs. The later engines had round cup shaped core plugs, the side plate engine had rectangular plates which bolted on. (shown in black in the top image below)

https://www.aulro.com/afvb/images/im...013/12/828.jpg

Addit: Note the shape of the sump is wrong for a side plate engine! :)

Thanks Diana,

I'll dig out the motor I have and see whether it's a side plate or not.


Colin

Quote:

---

Originally Posted by tom the pom

What will this engine be going in? a genuine 48 model?

---

What are you sniffing about for? I heard you were back in the country, my spies at immigration told me so.

Quote:

---

Originally Posted by andy_d110

What are you sniffing about for? I heard you were back in the country, my spies at immigration told me so.

---

Tom always has his antennae tuned to 1948!

Just whisper 86...anything and Tom will appear as if by magic.

[QUOTE=Lotz-A-Landies;1776723]T


diana i may be able to help him jim

Hi Tom
Yes it would go on R862604
You still cooking BBQ like the one we had in the field in July last year at the series one gathering
cheers
Ian