My 1955 86" rebuild.

I had been occupied with other Land Rovers over the past 2 days, but in order to get at those vehicles I had to do a 'Rubic's Cube' in order LOL, my wife was around to help move the Series 1 yesterday, but today she is away with her Bonsai club in Sydney, so I had do it all by myself.
Hook it up with a chain to the 110 turn the steering etc pull it a little bit you know the routine in & out the 110 +++, finally got it where I could push it backwards, this is achieved by hanging a tyre off the bar and push against the bar on the S1
http://i659.photobucket.com/albums/u...ps7daa1cbb.jpg
it is now safely back in front of the garage, car club run tomorrow o nothing will be happening until well after lunch, cheers Dennis :angel:

Hi Dennis,

Missed your posts over the last few days, wondered where you had gotten to:)

Regards,
Matt

This morning I had to attend a car club run, so many things to attend :o:(, and with 2 jobs both being casual, well trying to balance it all and get some time in on the Land Rovers.
The morning was quite interesting as we visited a chap who collects and restores older farm machinery, he had 40 odd tractors, and some ?? maybe beyond it, here are a few images
http://i659.photobucket.com/albums/u...ps86397b71.jpg
http://i659.photobucket.com/albums/u...ps2b804b9a.jpg
http://i659.photobucket.com/albums/u...psf1f0be4f.jpg
http://i659.photobucket.com/albums/u...ps6c207e3b.jpg
and these old spanners
http://i659.photobucket.com/albums/u...ps42487cb6.jpg
well I didn't get home until almost 1400hrs, a quick bite to eat and I sat down with the wiring loom and the Vinwire list, I did manage to complete an ignition circuit and add a few wires here n there
http://i659.photobucket.com/albums/u...psb24e7fd8.jpg
and in this lot I have still to sort out what is what n where it goes
http://i659.photobucket.com/albums/u...psf9878106.jpg
anyway that's been my day, cheers Dennis :angel:
ps at least I don't have to go to work tomorrow or for the next 2 weeks,, ;)

That means we will see a post every day for the next two weeks

Strewth!! What have I got myself into now, well I guess I won't have any excuses LOL cheers Dennis

I took all my Landrover parts to the Qld Militery swap yesterday & thought you may like to see these photo's. I went by my self so didn't get around to see all the Landrovers ( didn't want to leave the parts unattended) so took these photo's from where i had my parts .:D

Well the day started out fine, weather wise but it soon went South, so did a few other things :o:(:(:(.
I had ideas of fitting some sealed rivets (pop variety) so I fired up the compressor only to see the exhaust/muffler flopping around like something in the surf, switch off engine, touch the muffler with a rag, it's loose, so pull out compressor to get a good look and to check what size spanner I will need, only to find that the stud is missing, it has snapped off
http://i659.photobucket.com/albums/u...ps24f1771a.jpg
I can't put down here what I said to self at the time, but I'm sure you get the idea :mad::mad::mad::mad::mad:, so I guess now I will have to go to Maitland tomorrow and purchase probably 4 different sizes in Cobalt drills up to approx. 6.5mm, the stud size is 8mm x 1.25, I do have a set of easy-outs, hopefully I wont break anything.
I will need to remove the belt guard so I can get a good straight line onto the snapped stud, it is approx. 2.5<>3mm below the alloy surface. I know that there will be nothing like an anti-seize etc on the threaded section of the stud, I don't think I will try to tap it anti-clockwise with a center punch, knowing my luck I would jam it up in the threads and make a bad situation worse, so I guess I'm saying that I won't be doing much on the Series 1 until I have fixed it :(:(:(:(:eek:, cheers Dennis :angel:
ps why does this always seem to happen, when you least expect it,,.:censored:

Quote:

---

Originally Posted by Dinty

------ so I guess now I will have to go to Maitland tomorrow and purchase probably 4 different sizes in Cobalt drills up to approx. 6.5mm, the stud size is 8mm x 1.25, I do have a set of easy-outs, hopefully I wont break anything. ------

---

You could get some left handed drill bits, try here;

left hand drill bit | eBay
.

Is that like a left handed screw driver?

Quote:

---

Originally Posted by Chris66

Is that like a left handed screw driver?

---

No! left hand drill bits are for real and will do the job nicely of removing broken off studs.

https://www.aulro.com/afvb/images/im...014/10/661.jpg
.