Thread: Headlights (or the lack thereof)

To surmount the same problem with Sweet pea, I prised the surround of the actual old light up and outwards using multigrips and removed the original Lucas glass lens from my pitted and rusted reflectors. I then purchased a couple of 7" headlights from one of those common cheap outlets and with a stanley knife separated the glass lenses from the reflector sections. (They are glued together)
Using sikaflex it was a pretty simple job to rejoin the original Lucas lens back with the more modern light itself, fit a readily available relay that affected both beams and then at last I could both see, and kept the original glass lens look.
Whether the old lenses actually focused the newer bulbs correctly didn't really bother me as it was planned for very limited use anyway.
I am about to do a similar conversion with the new toy.
Regards
Glen

Sorry for the delay but finally had a chance to look today while changing to new crystal reflectors.

Seems to be 120mm to back of bowl and my LED bulbs with original reflector is 110mm so just make it. Can't fit the existing dust covers over the new bulbs so would have to work out a way to do it, maybe a slit on the rubber to get it over the fins and a bit of silicon to reseal. For interest sake, the crystal reflectors i've just changed too with the led's in come to 100mm so a touch more room now.

Originally Posted by Lotz-A-Landies

Was just looking at the H4 LED hi/Lo conversions and most have a large fan unit on the back.

How do you fit one of them into a Perentie headlight bucket? ( or a Series 1 bucket for that matter)

And what do you do about the dust problem when using off highway?