Page 2 of 27 FirstFirst 123412 ... LastLast
Results 11 to 20 of 268

Thread: LANDY'S LAST RESTORATION BY ME

  1. #11
    Join Date
    Sep 2012
    Location
    Westlake ,brisbane
    Posts
    3,922
    Total Downloaded
    0

    DISTRACTIONS

    I spent the morning at Qld Raceway with the Jaguar drivers Club track day. here are a few of the cars there .

    Now it is back to work on the S1
    Attached Images Attached Images

  2. #12
    Join Date
    Jan 1970
    Location
    Cessnock NSW
    Posts
    4,990
    Total Downloaded
    0
    Yes, Wayne, get back to work LOL, love the Mk1 Morris Cooper 'S' had one way back in the late 60's, I couldn't get in or out of one these days though, cheers Dennis

  3. #13
    Join Date
    Sep 2012
    Location
    Westlake ,brisbane
    Posts
    3,922
    Total Downloaded
    0
    OK , OK Dennis , this afternoon was quite productive , I jacked up the rear of the vehicle & removed the brake drums to find booth side oil seals leaking but wheel cylinders OK.

    Then I removed the pinch bolt at the bottom of the steering column so I could remove the steering wheel centre with dip switch & horn button. I gave the bottom of the brass tube a spray with CRC then genteelly pulled up on the top while twisting it so I wouldn't brake the centre. I found I needed to open the back of the tilt to give me enough room to pull the tube all the way out of the column. ( I need to clean the horn contact) I now removed the steering wheel after removing the pinch bolt. ( it also needs some repairs )
    Attached Images Attached Images

  4. #14
    Join Date
    Sep 2012
    Location
    Westlake ,brisbane
    Posts
    3,922
    Total Downloaded
    0
    Once the steering wheel was out of the way I removed the floor & gear box tunnel to reveal quite a clean gear box , looks like selector shaft seals are leaking or grease I have packed around the bottom of the gear stick has melted when running the PTO to drive a water pump for a display at car shows.
    My mate in Tasmania is dismantling his 88" S1 at the moment ( he started a week before me) so we are going head to head sending each other photo's of our progress. he is ahead of me at the moment but I think I will soon catch as he has major chassis repairs to do & his is the fires strip down since it left the factory .
    That's as far as I got today it is my grand sons birthday today & they have just turned up. Not too bad for a couple of hours work.
    I will have to start reading through Dennis's restoration to see how he did a few things like repairing the steering wheel. Hope to get fire wall striped today so I can get one of the son in-laws to give me a hand to lift it off over the weekend.
    Attached Images Attached Images

  5. #15
    Join Date
    Sep 2012
    Location
    Westlake ,brisbane
    Posts
    3,922
    Total Downloaded
    0
    In the last photo of the top of the steering column the indicator switch is missing the green plastic light cover , I''ve been looking for one for 26 years , if any body has one I would be interested in buying it. I want to keep this switch as it is self cancelling , the new ones you buy now are not.

  6. #16
    Join Date
    Dec 2006
    Location
    Narrogin WA
    Posts
    3,092
    Total Downloaded
    0
    Quote Originally Posted by 1950landy View Post
    ...the indicator switch is missing the green plastic light cover , I''ve been looking for one for 26 years ...
    If you can find some acrylic round bar - I know it is available in clear - it can be turned, drilled, polished and threaded on a lathe. You can buy translucent coloured varnish if you can't buy coloured bar,

    Cheers Charlie

  7. #17
    Join Date
    Sep 2012
    Location
    Westlake ,brisbane
    Posts
    3,922
    Total Downloaded
    0
    There is a guy at the markets who sells it in clear or colour . Trouble is since I retired I don't have access to a lathe . I thought about buying one of the new ones & taking it off it.

  8. #18
    Join Date
    Sep 2012
    Location
    Westlake ,brisbane
    Posts
    3,922
    Total Downloaded
    0
    Saturday morning I removed anything from the firewall that would stop me from lifting it off the chassis . I just have to wait for somebody to give me a lift . You will see I have only cut all the wiring as I have ordered a new harness from Vintage Wiring Harness, should be here in a couple of weeks , ordered it with the extra wires for indicators. The last time I made my own , I wouldn't do that again . I was going to get one from UK , but after 6 email's trying to get a freight cost I give up.
    The next job will be to remove the rear tub & seat box.

  9. #19
    Join Date
    Sep 2012
    Location
    Westlake ,brisbane
    Posts
    3,922
    Total Downloaded
    0
    BUGGER ! I forgot to click the upload button for the photo's.
    No work on LR today , wife has been vomiting all night , must have caught some sort of bug off somebody
    It's a holiday tomorrow & son in-law wants a lift with the trailer he is repairing the rust in so should be able to get him to help me lift firewall off.
    Attached Images Attached Images

  10. #20
    Join Date
    Sep 2012
    Location
    Westlake ,brisbane
    Posts
    3,922
    Total Downloaded
    0
    The firewall has now been removed , now I only have to remove the rear tub .
    I can give every thing a proper clean & inspection .
    Attached Images Attached Images

Page 2 of 27 FirstFirst 123412 ... LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!