Thread: Diagnosis - Death?

Finally got around to taking a look at the clutch mech. Pin , bellhousing end, had sheared off. Managed to retrieve the bottom half of it from within the bellhousing using my trusty magnet on a pole thing. Bought a couple of pins from Colins link, chose the rover ones rather than the cheapos. All good, mobile again which is good as It was hard going wheeling barrowloads of wood up the slope! Not entirely sure how its fixed it as the pin still had enough length to pass through the shaft, but there you go. Thanks very much for everyones help.
cheers,
D

It doesn't take much movement there to make a bid difference to the peddle travel.