You can buy the semi-tubular rivets from an Ebay vendor (or buy direct).
Problem is you need a rivet squeezer to install the rivet. Squeezer around $200 plus you need to locate the correct anvils.
I did look into it but it was getting costly, I also considered making something but I don't have an immediate need.
Rivets and Riveting Tools
Squeezer & 1 set of anvils/dies 180GBP on the above site. They also hire a squeezer out but they are in the UK.
I did find the squeezer in Australia, try an aircraft supplies company, but anvils would have to be made or imported.
Best of luck.
Colin
'56 Series 1 with homemade welder
'65 Series IIa Dormobile
'70 SIIa GS
'76 SIII 88" (Isuzu C240)
'81 SIII FFR
'95 Defender Tanami
'58 Series II (sold)
Motorcycles :-
Vincent Rapide, Panther M100, Norton BIG4, Electra & Navigator, Matchless G80C
Bookmarks