Page 8 of 9 FirstFirst ... 6789 LastLast
Results 71 to 80 of 82

Thread: Rossco. 1953 80inch 2L

  1. #71
    Join Date
    Oct 2014
    Location
    Northern NSW.Australia
    Posts
    1,970
    Total Downloaded
    0
    Few More.
    Attached Images Attached Images

  2. #72
    Join Date
    Oct 2014
    Location
    Northern NSW.Australia
    Posts
    1,970
    Total Downloaded
    0
    Pick up some D lights bits to make up a couple. Thanks W.
    Replaced missing fixing bolts. Re threaded brass nuts to suit. Tub of BA nut and bolts unearthed Thumb screws for case halves.
    Made cork gaskets. Lens one a bit thick. 2mm perfect for covers. Just need to find the 0.8mm sheet.

    whitehillbill
    Attached Images Attached Images

  3. #73
    Join Date
    Oct 2014
    Location
    Northern NSW.Australia
    Posts
    1,970
    Total Downloaded
    0
    Few more.
    Attached Images Attached Images

  4. #74
    Join Date
    Oct 2014
    Location
    Northern NSW.Australia
    Posts
    1,970
    Total Downloaded
    0
    Good Evening.
    Take one very bent and broke stator tube and top moldings. Bit of work and parts from
    www.charlesworthmoudings.co.uk And a few hrs Today.
    P
    roblem was getting the horn assembly off old unit, as it is riveted over. Decided to drill off and see what's underneath. Drilled out center and tapped a thread in the brass. Smallest I had was M3 0.5 and a matching screw. Fiber disk was brittle, and broke. May have been cracked so repaired with a treatment of super glue and some sanding.
    Everything cleaned up. Bit of graphite powder for lub and reassembled with new parts.
    Parts Ordered.......
    1 x Felt Bush - 08832
    1 x Stator Tube Rubber Intermediate - 07657 (they come as a set of 3)
    1 x Oil Retaining Washer 07676
    1 x Stator control tube Lower Grommet 56169
    1 x stator tube rubber mount set
    1 x Top Cover For Steering Column Control - 272094
    Including tracked postage. $200

    whitehillbilly







    Attached Images Attached Images

  5. #75
    Join Date
    Oct 2014
    Location
    Northern NSW.Australia
    Posts
    1,970
    Total Downloaded
    0
    Few more.
    Attached Images Attached Images

  6. #76
    Join Date
    Oct 2014
    Location
    Northern NSW.Australia
    Posts
    1,970
    Total Downloaded
    0
    Good Evening.
    Clark Rubber Tweed was online only.....So couldn't pick up Seat for for my 80 inch. Upholster said it would be better if I picked up some......Got home and took to a 6 inch single foam mattress, with a Electric Carving Knife. Tricky cutting in half to make seat backs and Bench seat bases. Still have to trims seats bases to 4 inches at the rear.

    whitehillbilly
    Attached Images Attached Images

  7. #77
    Join Date
    Oct 2014
    Location
    Northern NSW.Australia
    Posts
    1,970
    Total Downloaded
    0
    Tub and Tail Gate repairs done.
    Very abused, battered and bent.

    whitehillbilly
    Attached Images Attached Images

  8. #78
    Join Date
    Oct 2014
    Location
    Northern NSW.Australia
    Posts
    1,970
    Total Downloaded
    0
    Hoop Retaining 'Special bolt' and plates made and fitted.

    whitehillbilly
    Attached Images Attached Images

  9. #79
    Join Date
    Mar 2017
    Location
    Tamworth NSW
    Posts
    103
    Total Downloaded
    0

    Well done!

    Quote Originally Posted by whitehillbilly64 View Post
    Good Evening.
    Clark Rubber Tweed was online only.....So couldn't pick up Seat for for my 80 inch. Upholster said it would be better if I picked up some......Got home and took to a 6 inch single foam mattress, with a Electric Carving Knife. Tricky cutting in half to make seat backs and Bench seat bases. Still have to trims seats bases to 4 inches at the rear.

    whitehillbilly
    Well done! Lucky to find some repairable D lamps and a bucket of BA screws! The Horn/dip came up really well. The price seemed pretty good as well. You will have to call this 80 Lazarus, because slowly, but surely it's coming back from the dead. If you need the seat base drawings with dimensions, I have some stashed away somewhere. You need to source some really firm foam for the bases, most of it is way too soft and unsupportive. When lockdown is behind us, if you are passing by the Tamworth District, you are welcome to have a look at my rebuilt but unrestored '53 if you want to check out any details for yours. Mike, 5380.

  10. #80
    Join Date
    Oct 2014
    Location
    Northern NSW.Australia
    Posts
    1,970
    Total Downloaded
    0
    Thanks Mike.
    Well I have cheated a bit.......Most seat foam is far to hard.
    I added a piece of thin Ply with 4 drain holes above the Hessian, so I can use softer foam.
    Mystery spacer came from under Tub. Loose and only one ?

    whitehillbilly
    Attached Images Attached Images

Page 8 of 9 FirstFirst ... 6789 LastLast

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!