Camshaft Chainwheel is SOOOOO tight

Yes the cam drive is a tight sprocket. You will find two 5/16th BSF (I think) bolt thread 180 deg apart ether side of the centre bolt, these are for extractor bolts. Screw appropriate bolts through the sprocket and tension evenly. Should remove sprocket.

Cheers

Rick F

Quote:

---

Originally Posted by Rick Fischer

Yes the cam drive is a tight sprocket. You will find two 5/16th BSF (I think) bolt thread 180 deg apart ether side of the centre bolt, these are for extractor bolts. Screw appropriate bolts through the sprocket and tension evenly. Should remove sprocket.

Cheers

Rick F

---

Thanks Rick, I did eventually work that out myself, but it took me a bit of time. A seniors moment I suspect.
Thanks for the help
Jeff

Was half correct. I used those bolt holes to retain the end of a "Heavy" slide hammer, was same same for crank sprocket, but with claws.

Cheers

RF