Page 2 of 2 FirstFirst 12
Results 11 to 13 of 13

Thread: Camshaft Chainwheel is SOOOOO tight

  1. #11
    Join Date
    Aug 2012
    Location
    Tewantin (NOOSA area)
    Posts
    636
    Total Downloaded
    0
    Yes the cam drive is a tight sprocket. You will find two 5/16th BSF (I think) bolt thread 180 deg apart ether side of the centre bolt, these are for extractor bolts. Screw appropriate bolts through the sprocket and tension evenly. Should remove sprocket.

    Cheers

    Rick F

  2. #12
    Join Date
    Jan 2017
    Location
    Perth
    Posts
    299
    Total Downloaded
    0
    Quote Originally Posted by Rick Fischer View Post
    Yes the cam drive is a tight sprocket. You will find two 5/16th BSF (I think) bolt thread 180 deg apart ether side of the centre bolt, these are for extractor bolts. Screw appropriate bolts through the sprocket and tension evenly. Should remove sprocket.

    Cheers

    Rick F
    Thanks Rick, I did eventually work that out myself, but it took me a bit of time. A seniors moment I suspect.
    Thanks for the help
    Jeff

  3. #13
    Join Date
    Aug 2012
    Location
    Tewantin (NOOSA area)
    Posts
    636
    Total Downloaded
    0
    Was half correct. I used those bolt holes to retain the end of a "Heavy" slide hammer, was same same for crank sprocket, but with claws.

    Cheers

    RF

Page 2 of 2 FirstFirst 12

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!