Gentlemen,
I purchased a VinWire Harness for my 1953 Series 1 80", but I am wasting vast amounts of time, trying to work out where the various parts of the harness go. I don't mean the individual wires, as I have the LR Wiring Diagram for that, but where the bundles of wires go and are mounted. .

I have the chassis harness in, which runs through the right hand chassis rail and enters via the hole in the chassis below the steering box, and exits out the hole near the rear cross member.

The front harness for lights runs from the junction box up the right hand chassis rail, passing under the battery base (I believe) before running across the front to the lights in front of the radiator. (is that correct?)


The instruments harness appears to run from the junction box and up the bulk-head before disappearing into the instrument Pod via the three grommets below the windscreen .

My problem is that my truck had a home made loom of no specific design when I purchased it, (just a large bunch of wires zip-tied together, and that tells me nothing about the correct routing of the harness.

The Work shop manual is again silents on such matters, although there is a drawing showing the major sections of the harness, but not where it is placed.
So, I am hoping someone from out little community can pass on some basis directions. I'd love someone to share an image of the junctions box, showing where is should be mounted, and how the sets of wires enter and leave that junction box.

Any information, images, photos or drawings would be of huge help.

Many thanks
Jeff in Perth, WA