Gentlemen,
I would like to add an electric Oil pressure gauge to my '53 Series 1 80", in addition to the Oil Pressure warning light, as part of my rebuild.
However I need a T-piece adaptor to do this, but would like some advice on the adaptor, as I am not 100% confident that I have the threads correctly identified.
The Electric Pressure Sender has a 1/8" NPTT 27 TPI thread. The Land Rover pressure switch and the Gallery tube into which the switch screws is (I believe) a 3/8" BSF 20tpi thread.
So the part I am looking for has 3/8"BSF 20tpi Male on one end and female on the other, with a 1/8" NPT 27 TPI hole in the side to take the electrical Oil pressure sender. I'm struggling to find that particular combination, so was hoping someone might be able to point me in the right direction or correct any errors in my thinking's that I may have.
Bookmarks