I believe that the 80/86/107 rear cross members are identical but that the 88/109 have got 2 additional big tubes welded in to take 2 big bolts.
.W.
Are the rear cross members the same across the S1 era. I’m guessing the 80” may be a little different from the 86” and 88”. I was wondering if a cross member of an unknown cut-up S1 would be a suitable replacement on my 107??.
Mustlust
1950 Series 1 80in lights behind grill
1950 Series 1 80in rolling chassis looking for a body
1956 Series 1 86in
1956 Series 1 107
1957 Series 1 88in
1967 Mustang coupe 347 stroker
2011 Discovery 4 3.0
2009 110 utility 2.4tdci
I believe that the 80/86/107 rear cross members are identical but that the 88/109 have got 2 additional big tubes welded in to take 2 big bolts.
.W.
Back 35+ years ago the only replacement ones that were available were S2 which I modified to match my 1950 80". Had to cut down the out riggers, move position of the tabs that mount the tub at the rear, change the shape of the corners in the middle section, reposition the tail gate hingers & make it so the tow bar could be bolted on same as S1.
Search AULRO.com ONLY! |
Search All the Web! |
---|
|
|
Bookmarks