Now that my three brackets are claned up and ready to go - I shall be looking for replacement rubber to use.
Printable View
Now that my three brackets are claned up and ready to go - I shall be looking for replacement rubber to use.
Hi All
I have 2 types in my collection, been rubber with re-enforcing.
both about 2 inches square, one type about 3/8 of a inch thick the other about 1/2 inch thick.
cheers
iAN
Busy day (now time for a beer :D) I have finished the fuel tank and fitted it. Very happy with the end result and I shall be even happier if it doesn't leak anymore ;)
https://www.aulro.com/afvb/images/im...008/11/834.jpg'
https://www.aulro.com/afvb/images/im...008/11/835.jpg
I even got time to modify the front cross member so I could fit my new prop shaft.
https://www.aulro.com/afvb/images/im...008/11/836.jpg
All done for the weekend. Missed the horse race (you get that) but the bumper is on Shorty now and looks great. :D:D:D
https://www.aulro.com/afvb/images/im...008/11/519.jpg
Ian - I am as happy as a pig in mud mate :BigThumb:
It took a bit of mucking about to fix the ends of the chassis. But once that was out of the way I only had to get the holes in the right spot ;) I shall touch up the paintwork around the chassis and spring hangers during the week and then get stuck into sanding of panels.
Hi Troy
Gee I am over the moon
first time I have seen trainer wheels on a Sir's vehicle.
I finally proves what a old digger always knew
with training anything is possible,even Sir's!!!!!
gee it is looking good
after I told you how to do some spay painting
I managed to put some wonderful runs in some of the best finished paint i have done
much rubbing back I will try and try again
cheers mate
Ian
Well said Ian - I have been waiting for that. :D:D
Do you know that it was only recently that I have been allowed to work on it unsupervised :D I just needed a SNCO to keep an eye on things ;)
A bugger about the painting mate. You must post some pictures soon though, I am looking forward to seeing this.
Well the day trip is over (Wodonga - Bathurst and return). Thanks Justin for your help mate :D It is very much appreciated indeed :D:D All the best to the family.
Now its time for a beer (or the like) and to put my feet up.
Quote:
Originally Posted by olmate
Sounds good to me. :twobeers::beer::twobeers::beer:Quote:
Originally Posted by olmate
Easo
Easo - so you have found the trend in my posts :D:D:D;)
Are you heading back down this way any time soon?
Most likly driving through around Christmas on the way to Seymour. We will be stopping in Albury to see my Dad too.