With the demise of Bargo, Goulburn has built up to be a good swap with relaxed "rules" including setup on Saturday and plenty of space for new/occasional sellers.
Printable View
The best ones in Qld. that I still attend are in order by consistent takings:- Gatton HMCC, Toowoomba, Maleny HMCC, Nabiac(NSW) motor cycle, Nambour, Pine Rivers HMCC, Beaudesert.
I still go to Banyo (now at Capalaba), Mudgeeraba, Jimboomba, Allora Old Machinery Field Day, Triumph Club's All British swap. There are a couple of others I might go to every second or third year.
i havent attended Bendigo for years. The endless dust, heat and prices and miles of walking are too much for me to handle .
Bendigo has been over run with people selling goods nothing to do with autos, old wares that you will see at a trash and treasure market. ..pots and pans and clocks and everythiing under the sun . And much of the auto stuff is from the 60's and 70's..holden and falcon parts buy the truckload, with outrageous prices too... like rusty EH guards for $200 each ...
the good old days of barn find T model fords on trailers are long gone ....
Mike
Whether you like it or not, bric-a-brac dealers (one of my members refers to them as "the flea market grubs, dole cheats and tax dodgers all") are an established fact of life at most swap meets. Consider that for most organising clubs, their annual swap meet is their only significant source of revenue other than members subscriptions. Thus the club has a vested interest in filling as many vendor spaces as possible. Some swaps are almost over run by the bric-a-brac stalls.
The only clubs in SE Qld. that insist in "no bric-a-brac, hobby related items only" are the Historical Motor Cycle Club whose chapters run three very, very, good swaps, and the Triumph Sports Owners Association whose All British Swap is run on similar lines.
60's and 70's are the eras new entrants to restoration hobbies are at. Fewer enthusiasts are interested in pre WWII vehicles, and vintage(pre 1931) and veteran (pre 1920) machines. Check the auction results. Interest in brass era veterans in particular has declined remarkedly, unless the vehicle is one of note or has some fame. Ford T's have a small and faithful following as do A's but these are an aging group and most other enthusiasts have little interest in what were pretty bloody ordinary cars. There is still the occasional "barn find" but country areas have been pretty well picked over and usually only cheap mass produced vehicles are being "found" nowadays. The classics were mostly located decades ago. The cheapies were then ignored as being of no interest or worth.
I own a vintage Chev and veteran Dodge (possibly ex AIF) that I've had for a long time and don't really go to swap meets looking for parts for these vehicles but its interesting to see what is around and very occasionally a gem that you weren't looking for shows up. As a seller I've had the occasional shed clean out of those bits that were "too good to throw away" but as Brian said its not worth driving too far (more than about 200Km ?) to clear out the excess bits or for little return in the case of "professional vendors". I likewise avoid swaps associated with car shows. I do however find the "social" scene at the swaps where I know regulars to be a good place to catch up with people I don't see very often.
About 200k's each way from Brisbane is pretty well my travel limit for a swap meet, except for the one at the National Motor Cycle Museum at Nabiac. This is a good event, quite rewarding, and produces a lot of mail order business afterwards. It is "no bric-a-brac, hobby related items only".
The more complete cars I have seen offered for sale for restoration in recent years are all too often the ones that were passed over years ago as being too rough, too incomplete. Complete, or near complete, reasonably original pre-war cars are now rarities. If you are contemplating this sort of project, you are probably better off buying an older restoration that needs freshening up and non-original areas, bad work, mistakes, etc. sorted out. Likely be a lot less costly than undertaking a complete restoration of an incomplete or badly deteriorated vehicle.
I don't sell cars or parts. I handle machine shop, fitters and mechanics tools but not spanners etc., hobby engineer's, model maker's and restorer's supplies. I am moving away from used items unless I get some windfalls at auction. Some time next year I plan to have only new goods imported from USA, China, India.
Thanks for the advice, everyone
Hot weekend. Landy parts thin on the ground. A few useful tools, etc
Oh, yes ... and a NOS 518 PORK PIE LENSE (NO WINDOW) FOR $10!!!!!!
Another dealer had a stock of NOS lenses with windows for $120 ea
Happy days - accommodation booked for next year
D