Results 1 to 3 of 3

Thread: 1952 S1 gearbox jumping out of 2nd

  1. 15th February 2010, 11:17 AM #1
    mildred
    mildred is offline Master
    Join Date
    Dec 2008
    Location
    australia
    Posts
    375
    Total Downloaded
    0

    Exclamation 1952 S1 gearbox jumping out of 2nd

    Hi there,
    My series one 1952 is jumping out of 2nd gear, first stays in ok, third stays in so does top. I have been told that it is caused by a small 50cent broken spring on a shaft? it it difficult to repair with out taking out the gearbox?
    Reply With Quote Reply With Quote
  2. 15th February 2010, 12:26 PM #2
    groucho's Avatar
    groucho
    groucho is offline Master Subscriber
    Join Date
    Nov 2006
    Location
    Wollongong NSW
    Posts
    622
    Total Downloaded
    0
    Not realy. Thes pring plates are in the syncro hub on 3rd /4 gear
    Sounds like too mutch end float. Try tighening the special nut at the rear
    of the main shaft. access through the PTO cover.............
    Reply With Quote Reply With Quote
  3. 15th February 2010, 12:50 PM #3
    JDNSW's Avatar
    JDNSW
    JDNSW is offline RoverLord Silver Subscriber
    Join Date
    Jan 1970
    Location
    Central West NSW
    Posts
    29,510
    Total Downloaded
    0
    Possibly the spring on the detent ball on the first/second selector shaft, and also it is possible that the stop for the second gear selector has come loose.

    Also possible, but unlikely, that the symptom is due to extreme wear on the second gear dog, or, a bit more likely, the partial collapse of any of the three bearings that align the mainshaft.

    John
    John

    JDNSW
    1986 110 County 3.9 diesel
    1970 2a 109 2.25 petrol
    Reply With Quote Reply With Quote
« Marfa | clutch woes to clutch goes »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!