Printable View
Hi guys,
Good comments all round...I have replaced all hoses and the wheel cylinders now work ok....that hose that was giving me grief was mostly blocked....anyways, got a set from 4WD in Blackburn and these had Bearmach labels on them. Just have to bleed the bloody system...Fun...Not on 2A's.....
:(
G'day Conjames :)
I think it may be a little easier if you adjust all the brakes up so that the wheels are locked,then try bleeding in the normal way,longest line first,some workshop manuals state that you back off the adjustment, but I have found this to be the hard way, but have had success with adjusting up to lock the wheels then bleeding;)
cheers