-
Howdy,
I agree with nitemare,
on closer inspection, my oil cooler seems very aftermarket, and i think i have seen an orig. IIa oil cooler and it was quite different.
An update on the car,
I am going for a roadworthy tomorrow morning, hopefully of course passing i will take some photos and post them up over the next few days.
Things done to the car
-replaced water pump
-replaced coil
-replaced radiator
-ALOT of wiring :P
-rust inhibiting and painting
-upholstery
-degreasing
-steering damper and all shockies
-wiper motor
I have been working with my brother on the landie for the past week or so, we have invested alot of time and a fair bit of money at british offroad :P but we are very pleaed with our final product. Also the mass of spares have come in handy many times for replacing broken parts etc.
I have one question to do with series 3 wiper motors, we replaced our broken IIa motor with a sIII motor, although we are not sure of the park and brake lines and where to connect them from the motor, so i was wondering if anyone knew how to describe the circuit (they have 2 speeds) or better yet a good diagram.
Anyway, hopefully i will have some photos soon, I will also be taking it to fraser next tuesday with a few mates and am very much looking forward to that :D.
Sorry about the gap in progress although i have been working for a solid 8-7pm regime for 7 days now :P
cheers
James
-
Just a quick qn, how did you go with the rego and road worthy regarding the rear bench seats?
Mine is a 2a 68 109 and I am looking to put the bench seats back in and take it from the current 3 seat to 7 seat. It originally had rear bench seats but has been a 3 seater for many years. It has no mod plate regarding seating capacity though. I have just rego-ed it and it currently is a 3 seat ute. I also run with out door tops or roof.
-
Hi Sideroad
Yes i got her registered :D
Registered with 7 seats, was going to registered with all 11 seats but insurance was a little steep.
Also has no roof and doortops but with a rollbar behind the 3 front seats, as well as having no seatbelts.
No mod plates required.
I was very glad we got the roadworthy, we went to fraser the following week, ill try to find some photos.
Also, next job is piston rings, got a LOT of blowby.
Cheers
James
