Results 1 to 3 of 3

Thread: Vehicle Modification Codes

  1. #1
    VladTepes's Avatar
    VladTepes is offline Major Part of the Heart and Soul of AULRO Subscriber
    Join Date
    Feb 2004
    Location
    Bracken Ridge, Qld
    Posts
    16,003
    Total Downloaded
    0

    Vehicle Modification Codes

    Might be a starting point
    http://www.transport.qld.gov.au/reso..._vehicles2.pdf

    Also from here:
    Vehicle Modification Codes (mod plates)
    I found this list of wat the mod codes relate to:

    CODE MODIFICATION
    LA1 Engine Substitution
    LA3 Turbocharger and Supercharger Installation
    LB1 Transmission Substitution
    LD1 Rear Axle Replacement
    LD2 Differential Substitution
    LG1 Brake System Substitution (Design)
    LG2 Brake System Substitution (Modification)
    LH1 Convertible and Cabriolet Conversion (Design)
    LH2 Convertible and Cabriolet Conversion (Modification)
    LH3 Passenger Vehicle Extended Wheelbase Conversion (Design)
    LH4 Passenger Vehicle Extended Wheelbase Conversion (Modification)
    LH5 Individual and Low Volume Vehicles (Design)
    LH6 Individual and Low Volume Vehicles (Modification)
    LH7 Panel Van to Utility Conversion
    LH8 Roll Bar and Roll Cage Installation
    LH9 Street Rod Certification (Concessional Registration)
    LH10 Street Rod Certification (Unrestricted Registration)
    LK1 Seating Capacity Alteration and Seat Belt Installation
    LK2 Seat, Seat Anchorage and Seat Belt Anchorage Certification
    LK6 Child Restraint Anchorage Installation
    LK7 Motorcycle Seating Capacity Alteration
    LM1 Fuel Tank Alteration
    LO1 Australian Design Rule (ADR) Compliance
    LO2 Pre 1972 Imported Vehicle Safety Compliance
    LO3 Personally Imported Vehicle Compliance
    LS1 Steering Conversion (Design)
    LS2 Steering Conversion (Modification)
    LT1 Beaming and Torsional Testing
    so it would appear your mods are for:
    LG2 Brake System Substitution (Modification)
    LH6 Individual and Low Volume Vehicles (Modification)
    LK1 Seating Capacity Alteration and Seat Belt Installation
    It's not broken. It's "Carbon Neutral".


    gone


    1993 Defender 110 ute "Doris"
    1994 Range Rover Vogue LSE "The Luxo-Barge"
    1994 Defender 130 HCPU "Rolly"
    1996 Discovery 1

    current

    1995 Defender 130 HCPU and Suzuki GSX1400


  2. #2
    VladTepes's Avatar
    VladTepes is offline Major Part of the Heart and Soul of AULRO Subscriber
    Join Date
    Feb 2004
    Location
    Bracken Ridge, Qld
    Posts
    16,003
    Total Downloaded
    0
    A more complete listiof mo codes from here:
    Boostcruising.com > Mod Plate Codes

    Modification codes for light vehicles
    (GVM or GTM 4.5 tonnes or less)

    Engine
    LA1 Engine Installation / Modification
    LA2 Engine Design
    LA3 Engine Emission Test
    LA4 Vehicle Noise test

    Fuel System
    LB1 Fuel System Installation / Modification
    LB2 Fuel System Design

    Intake/Exhaust System
    LC1 Intake/Exhaust Modification
    LC2 Intake/Exhaust Design
    LC3 Turbo/Supercharger Installation / Modification
    LC4 Turbo or Supercharger Design

    Transmission or Driveline
    LD1 Transmission or Drive train Installation / Modification
    LD2 Transmission or Drive train Design

    Steering System
    LE1 Steering Modification
    LE2 Steering Design

    Suspension
    LF1 Suspension Modification
    LF2 Suspension Design

    Braking System
    LG1 Brake System Modification
    LG2 Brake System Design

    Body, Chassis or Frame

    LH1 Sunroof installation
    LH2 Turret or Roof Modification (eg sedan to convertible or back)
    LH3 Wheelbase or Wheel track Modification / Design
    LH4 Body, Chassis or Frame Modification
    LH5 Body, Chassis or Frame Design
    LH6 Determine vehicle rating (ie GVM, GCM or ATM, GTM)
    LH7 Structural Analysis: Beaming & Torsion Test
    LH7 Structural Analysis: Dynamic Stability Test
    LH8 Not Used
    LH9 Street Rod Construction
    LH10 Not Used
    LH11 Campervan and Motorhome Conversion

    Driving Controls or Aids
    LJ1 Driving Control or Aid, Installation / Modification
    LJ2 Driving Control or Aid, Design

    Seating or Occupant Protection
    LK1 Seat/Seat Belt Installation / Modification
    LK2 Child Restraint Installation / Modification
    LK3 Anchorage Design for Seats, Seat Belts or Child Restraints
    LK4 Wheelchair Restraint Installation / Modification
    LK5 Wheelchair Restraint Design
    LK6 Roll Bar/Cage Installation / Design
    LK7 Not Used
    LK8 Roll Bar and Roll Cage Installation

    Lighting System

    LL1 Lighting System Installation / Modification
    LL2 Lighting System Design

    Fuel Systems
    LM1 Fuel Tank Alteration
    LM2 Liquid Petroleum Gas Installation
    LM3 Compressed Natural Gas Installation

    Vehicle Standards Compliance
    LO1 Australian Design Rule Compliance
    LO2 ICV Passenger Cars and Derivatives
    LO3 Personal Imported Vehicle Compliance
    LO4 ICV Tricycle LEM1
    LO5 ICV Tricycle LEP1
    LO6 Street Rods
    LO7 ICV Motorcycle

    Suspension and Steering
    LS1 LHD Vehicle Steering Conversion (Design)
    LS2 LHD Vehicle Steering Conversion
    LS3 Front Suspension and Steering Conversion (Design)
    LS4 Front Suspension and Steering Conversion
    LS5 Rear Suspension Conversion (Design)
    LS6 Rear Suspension Conversion
    LS7 High Lift - 50mm to 150mm (Design)
    LS8 High Lift - 50mm to 150mm Conversion

    Body, Chassis or Frame
    LT1 Tow Coupling Installation/ Modification
    LT2 Fifth Wheel and King Pin Installation/ Modification
    LT3 Coupling Design
    LQ1 Vehicle-mounted hoist, crane, lift gate, etc, Installation / Modification
    LQ2 Vehicle-mounted hoist, crane, lift gate, etc, Design
    LQ3 Wheelchair Loader Installation / Modification
    LQ4 Wheelchair Loader Design

    Wheels, Tyres or Axles
    LW1 Axle Installation / Modification
    LW2 Axle Design
    LW3 Wheels/Tyres package Installation/ Modification
    LW4 Wheels/Tyres package Design

    Other
    LX1 Individually Constructed Vehicle (ICV)
    LX2 Imported Vehicle
    LX3 Moped, M/Cycle or M/Tricycle Modification
    LX4 Moped, M/Cycle or M/Tricycle Design
    LX5 Tow Truck Design



    Another list i found has
    LB1 Transmission substitution
    LB2 Rear axle subtitution
    LT1 Beaming & Torsion Tests
    LT2 Lane Change Manoeuvering Test
    LT3 Gaseous Emissions Test
    LT4 Noise Test

    So i'm not sure why there's a diffence between the 2 lists.

    Links
    http://www.rta.nsw.gov.au/registration/downloads/vib58.pdf
    http://www.dotars.gov.au/transport/safety/...ro_3Feb2006.pdf
    National Code of Practice for Light Vehicle Construction and Modification
    http://www.dotars.gov.au/transport/safety/...n/vsb_ncop.aspx



    Another list from Qld Transport
    http://www.transport.qld.gov.au/qt/LTASinf...%20_Feb2004.pdf

    LIGHT VEHICLE MODIFICATION CODES

    LA1 Engine Substitution
    LA3 Turbocharger and Supercharger Installation
    LB1 Transmission Substitution
    LD1 Rear Axle Replacement
    LD2 Differential Substitution
    LG1 Brake System Substitution (Design)
    LG2 Brake System Substitution (Modification)
    LH1 Convertible and Cabriolet Conversion (Design)
    LH2 Convertible and Cabriolet Conversion (Modification)
    LH3 Passenger Vehicle Extended Wheelbase Conversion (Design)
    LH4 Passenger Vehicle Extended Wheelbase Conversion (Modification)
    LH5 Individual and Low Volume Vehicles (Design)
    LH6 Individual and Low Volume Vehicles (Modification)
    LH7 Panel Van to Utility Conversion
    LH8 Roll Bar and Roll Cage Installation
    LH9 Street Rod Certification (Concessional Registration)
    LH10 Street Rod Certification (Unrestricted Registration)
    LK1 Seating Capacity Alteration and Seat Belt Installation
    LK2 Seat, Seat Anchorage and Seat Belt Anchorage Certification
    LK6 Child Restraint Anchorage Installation
    LK7 Motorcycle Seating Capacity Alteration
    LM1 Fuel Tank Alteration
    LO1 Australian Design Rule (ADR) Compliance
    LO2 Pre 1972 Imported Vehicle Safety Compliance
    LO3 Personally Imported Vehicle Compliance
    LS1 Steering Conversion (Design)
    LS2 Steering Conversion (Modification)
    LT1 Beaming and Torsional Testing
    Might be worth putting this in a seperate sticky somewhere... any suggestions as to which forum ? Possibly the technical one ?
    It's not broken. It's "Carbon Neutral".


    gone


    1993 Defender 110 ute "Doris"
    1994 Range Rover Vogue LSE "The Luxo-Barge"
    1994 Defender 130 HCPU "Rolly"
    1996 Discovery 1

    current

    1995 Defender 130 HCPU and Suzuki GSX1400


  3. #3
    Join Date
    Jul 2006
    Location
    East-South-East Girt-By-Sea
    Posts
    17,578
    Total Downloaded
    0
    Mod Hat On.

    This thread has been stuck and locked to restrict the thread to important modification information only. (This is not saying your stuff is not interesting.)

    Should you have information that should be included, PM me and I'll open up the thread Or better still post a new thread or post and if the information is relevant, I'll merge the info into the Original thread.

    Diana

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!