under seat storage box

does this guy david , have spares for the 2a's then ?

Quote:

---

Originally Posted by sykes1

does this guy david , have spares for the 2a's then ?

---

I doubt it as he collects mainly series 1's...I don't think I saw a series 2/2a's down there...anyway the seatbox you are after has to have the "box" fitted already hence why you don't as it had duel tanks...I suspect you will have to find a new seat base;)

Unless you are good at fabrication:)

I can now take piccy's if required:)


Mrs hh:angel:

yes a picture would help with the fabrication,
Thanks

Back of box



https://www.aulro.com/afvb/images/im...010/08/926.jpg

Inside





https://www.aulro.com/afvb/images/im...010/08/921.jpg

I say it would be faster to replace the whole seatbox than make
the toolbox My 2c anyway. should be pleanty layling around.........





https://www.aulro.com/afvb/images/im...010/08/920.jpg

first is one I have in the paddock, second is in "zara" my 2.25 series 3

Mrs hh:angel:

The first 2 are in "jack" 6cyl '69 s2a 109" and the second is the bottom of another one I have in the paddock;)

Mrs hh:angel:

Quote:

---

Originally Posted by d@rk51d3

funny, I went and checked out the seatbox on my 2a...... And the holes are a perfect match :D

---

But AFAIK not all of them had the holes, particularly the ones at the front. Those are the ones I was suggesting.

But I have been wrong before!

Or was I mistaken? :angel:

Quote:

---

Originally Posted by Lotz-A-Landies

But AFAIK not all of them had the holes, particularly the ones at the front. Those are the ones I was suggesting.

But I have been wrong before!

Or was I mistaken? :angel:

---

Even the front matches.............. weird. :)