Series 2a buying advice

Thanks for that UncleHo:). I replaced the 1" 15/16' tap in ones some of which had been replace before. The motor is a little tired and has a bit much blow by so I will start to rebuild the spare motor as soon as I can. Looking at the part suppliers overseas the bits needed for a rebuild are not too expensive so thats the plan at this stage.

Hi All.

Quick update on Mary's progress if anyone is interested. Engine rebuild underway on the spare motor(I think it is the original) block is ready for re boring just waiting for parts to arrive from the UK. Will start on the head this weekend.
Boy that crank dog on the front of the crankshaft is done up tight:mad:
1 inch drive impact gun didn't budge it!:twisted: Sledge hammer and 1 inch whitworth ring spanner did the job but:p

Picking up a Ute cab for her next week so will give it a coat of paint and bolt it on over the next few weeks. Love the way the SWB Ute's look.

Cheers Simon

Sounds good:)
Keep the pic's coming please, then we can say she's looking good:D

Some photos for those interested
http://www.aulro.com/afvb/members/vk...6-img-0212.jpg


Bottom end prior to stripping down


http://www.aulro.com/afvb/members/vk...4-img-0207.jpg

and after the dirty work

http://www.aulro.com/afvb/members/vk...0-img-1623.jpg

http://www.aulro.com/afvb/members/vk...9-img-1622.jpg

That crank dog is done up tight:mad:not even the big rattle gun would move it:eek:

http://www.aulro.com/afvb/members/vk...8-img-1626.jpg
Late night planned in the shed tonight stripping the head down

Hi All. Check out the photos of Mary as she gets her top off:eek:, and the ute cab going on :D
http://www.aulro.com/afvb/members/vk...es-topless.jpg

http://www.aulro.com/afvb/members/vk...es-topless.jpg


http://www.aulro.com/afvb/members/vk...es-ute-now.jpg

Hi All. Some more photos as things slowly progress. Have completed the engine rebuild and hope to have her back in the car over Melbourne Cup weekend. I still have to change the clutch throw out bearing and I
thought I might do the tie rod ends as they will never get any easier to get at!:D

Boy its been a big job cleaning all the parts, I'm so glad thats over:MileStone:
Next time I will have all the parts hot tanked and save myself days of work!

http://www.aulro.com/afvb/members/vk...4-sam-0163.jpg

https://www.aulro.com/afvb/images/im...011/11/818.jpg

http://www.aulro.com/afvb/members/vk...2-sam-0162.jpg

http://www.aulro.com/afvb/members/vk...6-sam-0165.jpg

http://www.aulro.com/afvb/members/vk...0-img-0313.jpg

Using Plastigauge for the big end clearances.

http://www.aulro.com/afvb/members/vk...9-img-0290.jpg

Can wait to see how she runs!!!!

Cheers Simon.

Fitted the new motor and she runs like a champion :beer:Very satisfying after all that work. Just a small oil leak coming out of the fuel pump to fix somehow.
She even goes up hills in top gear now without filling the cab with smoke. Still bloody slow but!

Next job is to help Mary look a little nicer :D

Mary gets some new shoes!
https://www.aulro.com/afvb/images/im...2011/11/19.jpg


http://www.aulro.com/afvb/members/vk...2-img-1997.jpg



They helped her top speed a little too:)

I think we made it to 80kph:burnrubber:

Nice photos of Mary - she looks good in her new shoes.:)

I need some new tyres for my 1958 swb ute "Cowra", & it still has the standard size swb rims -- So what size tyres & brand did you get?

thanks
Steve

Hi Steve. I decided to go with LWB 5 1/2" rims and run 7.50 16, the larger diameter makes her a little faster. I,m thinking about changing the speedo as well to keep everything correct.

As for tyres I looked everywhere to find something that looked close to what would have been on her originally, not much to chose from. Bar treads look fantastic but they are bloody terrible to drive on:( and I wanted radials. So, I took out a second mortgage(a helpful thing if you own land rovers) and had 5 new Michelin XZL's fitted with new tubes. Other than the pain in my back pocket I could not be happier with them and I think they look perfect, the side walls have a real 1960's look. :cool:

I don't think you can get XLZ's in 6.00 or 6.50 which you will need if you want to keep the original 5' rims. Antique tyres have both those sizes in bar treads if you like cross ply tyres and they would look the part:)


check out the pics

https://www.aulro.com/afvb/images/im...12/07/1066.jpg

https://www.aulro.com/afvb/images/im...12/07/1066.jpg

Cheers Simon