It will not start , what's up with the bloody thing

Sounds a bit similar to mine, although mine started on 'start ya b'stard' and then cut out after a few seconds.

This made me think fuel, so I bled the fuel system and all good.

(Mine sits for 4 to 5 weeks whilst I'm away, so I'm guessing there's a small fuel leak somewhere).

Blknight - How many rpms is a good cranking speed?

Quote:

---

Originally Posted by Blknight.aus

if its not kicking on areo then its low cranking speed.

you need a deep reach socket to get the glow plugs out...

Might be able to free up wednesday to come have a look.

---

You might need to bring a deep reach socket, take it i need to get some new plugs?

your electrics are a crap fight, lets not blame the plugs till we know they're being fed right.

I used a 3/4"? ratchet ring spanner to get mine and Ratel10mm's glow plugs out and it worked a treat. Juddy if u r stuck give me a call if you still want to have a look, I.m ok for Saturday this weekend if you want. Have you checked your valve clearances to make sure you have enough compression???
Gimme a call 0448799102.
Cheers Ian

You'se blokes up there have such a great support network!

Wish I had one down here too! :(