Thread: Starter

Buy a rebuild kit from Ashdowns in Ossie Park.





Using Capitals, the difference between helping your Uncle Jack off a horse or helping your uncle jack off a horse...

Hey jurgens how is the rebuild going mate. Have you made much progress yet. And series don't need a starter just crank it over by hand

What is the problem with the starter? Usually a clean up will fix them!

John

Originally Posted by JDNSW

What is the problem with the starter? Usually a clean up will fix them!

John

Hi there John,

There was a bit of smoke coming from it when I tried to start it, keeping in mind that I cranked it a fair amount during this process. It was spinning OK at this time. I then opened it and gave it a clean, the bushes has about 50-60% left on them. After replacing the starter it does not spin fast enough to engage the flywheel and it still smokes.

So I'm not sure if I'll be able to get it rebuilt or if I have to replace it.

Cheers, Jurgens.

Originally Posted by matpoli

Hey jurgens how is the rebuild going mate. Have you made much progress yet. And series don't need a starter just crank it over by hand

Hi there Mat,

I know a crank handle should do the job mate but this one has been standing for quite some time. At this point I have decided that I'm going to get her running first and then see what needs attention then go from there. I've got a bucket load of things coming in from the UK to redo all the brakes, wheel bearings and all the hoses & water pump. The radiator has been recored and is ready for pick-up. Hangover (Steve) and TelfRRC (Neil) both has donated spares to get the electrical side going, thanks guys.

Other than that not much has happened. I'm going to try and have it running by September for the WA-AULROians Family Fun Weekend. I don't think it will be registered so I'll put it on a trailer.

Cheers, Jurgens.