New Project...

Hi All,

Well another day on the tools - and a bit achieved, with a special thanks to Super Gav...

First up - fit the hand throttle:
http://i1155.photobucket.com/albums/...ps1c8c3878.jpg

Next - fit the gaskets and master Clutch/Slave cylinders:
http://i1155.photobucket.com/albums/...ps3028b72e.jpg
http://i1155.photobucket.com/albums/...psc34caff7.jpg

Next - replace the front seal, install the pulley and fan blades:
http://i1155.photobucket.com/albums/...ps6a378b00.jpg

Next - install the passenger side brake line:
http://i1155.photobucket.com/albums/...psf468b058.jpg

Next - replace ALL of the tie rod ends (although I only took one photo, you all get the idea):
http://i1155.photobucket.com/albums/...ps7ee7d00b.jpg

Next - install the pedal boxes, bracket and springs:
http://i1155.photobucket.com/albums/...ps020180ba.jpg

Next - check the steering box, top up the oil - it seems to have loosened up a bit over time and now seems normal (not as tight as it was):
http://i1155.photobucket.com/albums/...ps338f9d78.jpg

Next - install the starter motor:
http://i1155.photobucket.com/albums/...pseef4b0a1.jpg

Next - install the fluid reservoir, various brake/clutch lines and the clutch flexible line:
http://i1155.photobucket.com/albums/...ps1a9458e0.jpg
http://i1155.photobucket.com/albums/...psd3e2314d.jpg

Another big day - special thanks goes to Super Gav! (How he doesn't get his cape caught up while working on the car, I shall never know). :wasntme:

Close now!!! Wiring, start up and wings on !!! :) So, was there two 101's in the drive today!?? :D

Quote:

---

Originally Posted by Sitec

Close now!!! Wiring, start up and wings on !!! :) So, was there two 101's in the drive today!?? :D

---

No, only 1 101. GG lives a fair way from me, so I take the work car and use their fuel.

Yes, wiring, wings and the biggy - brakes. But getting close.

Quote:

---

Originally Posted by bacicat

No, only 1 101. GG lives a fair way from me, so I take the work car and use their fuel.

Yes, wiring, wings and the biggy - brakes. But getting close.

---

Mmmmm.... Diesel 101... Can go anywhere then!! :p

Hi All,

Not a lot done lately - I'm finding that re-fitting things (without scratching them) by myself can sometimes be a bit of a challenge!

First up - fit the bonnet thingy:
http://i1155.photobucket.com/albums/...ps6d79c2d7.jpg

Next - install the bonnet protection strip (thanks Gromit):
http://i1155.photobucket.com/albums/...psa77a9949.jpg

Next up - fit the grill panel and drivers side wing. The wing is only on loosely until I can get a second set of hands!
http://i1155.photobucket.com/albums/...ps3a62342f.jpg

That's it for today.

Hi All,

Well today was a big day - things sure do move along quickly when you have an experienced hand helping/guiding you along..

Thanks goes to Super Gav - I am not sure how he finds the time to fit all of his projects in at once, but he manages!

I didn't manage to take photo's of everything - because things moved at quite a quick pace, but here is a list of jobs done today:

* Final fit/adjustment of drivers side wing.
* Install Radiator + Radiator support bracket.
* Install top radiator hose + Radiator Cap
* Modify / install dip stick
* Modify / install Alternator mount/bracket
* Install Passenger Side Wing
* Install Bonnet bracket
* Install Bonnet arm
* Install Bonnet spare tyre rubber stops
* Install Bonnet spare tyre holder
* Install Bonnet
* Install Spare Tyre on Bonnet
* Install Front Bumper
* Clean/Polish Head Light Surrounds
* Install Head Lights
* Install Front Badge
* Install Grill
* Install Wing Mirrors
* Test fit Parkers

Push the baby out for a photo shoot while there was still some light...

http://i1155.photobucket.com/albums/...ps4df11b88.jpg

http://i1155.photobucket.com/albums/...psbd4effb6.jpg

http://i1155.photobucket.com/albums/...ps5af67036.jpg

http://i1155.photobucket.com/albums/...psb48a9471.jpg

http://i1155.photobucket.com/albums/...psdf8913f1.jpg

http://i1155.photobucket.com/albums/...ps4b0b79f7.jpg

http://i1155.photobucket.com/albums/...psaaefe02a.jpg

http://i1155.photobucket.com/albums/...psfa5e5421.jpg

http://i1155.photobucket.com/albums/...psc6f7f9f4.jpg

I am really happy with the colour combination - and how well the vehicle is starting to look. There is still a lot of work to be done - but it's getting there!

You can see the Grey Ghost lurking in the back-ground - it has been invaluable using the Grey Ghost when trying to work out how bits go back on after 2 years!

You can also see the 101 hiding away - I can't wait to finish Roger and start using him & the 101 (Dirty Harry)

I am absolutely lovjng following your project as I am starting to restore a 77 SWB... a quick question if I might .. where do you get the bonnet bracket for the spare wheel? ... my wheel is behind the seats in the rear.

Thanks

Craig

This thread has been awesome!

I love how you barely used any new parts, just reco'ed what you had.

could you post a video of how it drives, particular with the overdrive?

Hi Craig,

My vehicle already had the spare wheel holder and bracket attached to the bonnet - I thought that it was original equipment...

There is one on ebay at the moment (nothing to do with me):
Land Rover Spare Tyre Holder EX Army | eBay

Or you could try and contact the Ho Har's - who have a wrecking notice on this forum, they might have the bits.

RR - When the car is driving (still a while off, a few months I would guess) - I promise to post a video of it!

Bonnet spare wheel carriers can be fitted to any Series bonnets, and were fitted to a large proportion of the Series Landrovers sold in Australia - I have, I think, six bonnets here, and only one did not have a carrier attached. They could be fitted either at the factory or as a dealer fitment. A 7.50x16 tyre on a deluxe bonnet without the depression for a tyre is getting a bit high, and any tyre wider than 7.50x16 on any bonnet is also a bit high and could possible lead to an infringement notice from a zealous cop.

The carriers varied slightly over time, but are all interchangeable. The bolts to hold the tyre clips come in two head sizes, to match the 9/16"BSF or 26mm wheel nuts, but all have 1/2" BSF thread. There are about three different clips, but all are interchangeable, although some only suit a particular offset/tyre size combination. The peg for a padlock was optional.

John