The wiring loom is the part I am interested in .. Please let us know how you go
Printable View
The wiring loom is the part I am interested in .. Please let us know how you go
Hi All,
First cab off the rank today - clean up the original rear number plate light.
Before:
http://i1155.photobucket.com/albums/...psb80176df.jpg
After:
http://i1155.photobucket.com/albums/...ps384992d8.jpg
First coat of paint:
http://i1155.photobucket.com/albums/...ps53fbef56.jpg
Then a few hours later - all of the rear axle parts are cleaned, ready to go back in:
http://i1155.photobucket.com/albums/...ps0d438b09.jpg
Cleaned both of these:
http://i1155.photobucket.com/albums/...ps5c48f08d.jpg
And a quick lick of gloss black paint - even though nobody will ever see it:
http://i1155.photobucket.com/albums/...ps81eb5dfa.jpg
And lastly cleaned the axles up as well:
http://i1155.photobucket.com/albums/...ps60a3ae72.jpg
Still lots of little jobs to do - but getting there slowly.. :)
I think there are quite a number of people interested in the wiring loom.Quote:
Originally Posted by Themadmob
Hi All,
Not much time on the car today, but did manage to...
Finish off installing the glass in the passenger door:
https://www.aulro.com/afvb/images/im...016/02/814.jpg
Second and final coat for these - ain't they purdee:
http://i1155.photobucket.com/albums/...ps677fe8c8.jpg
Even painted the inside of the number plate light - white (to aid in reflection):
http://i1155.photobucket.com/albums/...ps0c87f4e7.jpg
That's it for the weekend. Cheers.
Hi All,
Well Super Gav and Mighty Mick paid a visit today and we did some work on Roger. I don't have a heap of pictures, but the work done was:
Re-Assemble the rear axle and install the brakes:
http://i1155.photobucket.com/albums/...ps55b1eca5.jpg
Install the coil and remove the Voltage Regulator..
http://i1155.photobucket.com/albums/...psdb6a58a6.jpg
Install the original number plate light:
http://i1155.photobucket.com/albums/...psbc875ec3.jpg
Bleed the clutch (including a running repair on the fluid reservoir) - DONE
Bleed the brakes... Well we started on this and everything was going great until we got to the last brake (drivers side front)... We discovered a faulty wheel cylinder - even though it is completely brand new... :(
Gav got a start on installing the wiring loom - but I shall leave that up to him to describe in more detail for those interested.. The head scratching continued but between Gav & Mick they worked out what was going on - without any help from Autosparks as the loom comes without any instructions...
I know your pain :)Quote:
Originally Posted by grey_ghost
You've been mighty busy! You (and your helpers) have done some terrific work here, it's beautiful! :D well done :BigThumb:
Managed to sneak some work on Roger today - after going to Euora to "pick-a-part" off Phin's donor vehicle (mighty thank you to Phin) and before heading into work...
Drivers seat base lid fitted:
http://i1155.photobucket.com/albums/...psf4ed916f.jpg
Passenger floor installed:
http://i1155.photobucket.com/albums/...ps5341d55b.jpg
Trans Tunnel installed and all new knobs!!
http://i1155.photobucket.com/albums/...ps6f9e8a3b.jpg
That's it for the weekend - I have to work the rest of it now..
Where do you get the drive seat base from ....
Hi Themadmob,
Do you mean the black bracket that the seat-base sits in?
My understanding that adjustable drivers seats are an option on Series Landy's. So not all of them came with this option - I know that I have only seen it on a few Landy's so far.
My vehicle came with it - however I am sure that the Ho Hars on here could source one for you. They regularly wreck Series Land Rovers, so I rekon that they would be a good place to start.