Results 1 to 4 of 4

Thread: Some photos required!

  1. 5th February 2013, 10:57 PM #1
    Cobber's Avatar
    Cobber
    Cobber is offline Wizard
    Join Date
    Jan 2013
    Location
    Central Australia
    Posts
    1,958
    Total Downloaded
    0

    Some photos required!

    Firstly, apologies to admin if this is in the wrong section ... but it does involve my 'ride'!

    At the moment, I have pulled apart my 2a 109 (well body) ute for a respray and seal / gasket / mount replacement (while the engine is out anyway!) and I am wondering if anybody can provide pictures and/or info on the Galv strip along the top of (the outside) the tub / under the door windows, which carries on down the sides of the rear past the lights ... if that makes sense?

    Am I correct in saying these should be 'bare' Galv, because it's clear they weren't body colour. After carefully taking mine back to bare today, they just look like plain (dull) metal - they were 'painted' over before. Does this mean they need to be re-galvanised? If so, any suggestions?

    Basically, I am asking for a photo (close ups would help) so I know what I should be looking at as I have seen a few different versions of the same theme over time!

    Any help is much appreciated!
    Reply With Quote Reply With Quote
  2. 6th February 2013, 06:17 AM #2
    JDNSW's Avatar
    JDNSW
    JDNSW is offline RoverLord Silver Subscriber
    Join Date
    Jan 1970
    Location
    Central West NSW
    Posts
    29,513
    Total Downloaded
    0
    Probably should be in the 2/2a forum, but the answer is that all Series Landrovers (except a few special purpose ones) and coil sprung 110/90 up to 1987 left the factory with this body capping as it is called unpainted, being galvanised. In the showroom, this is bright, somewhat mottled zinc colour, but dulls with exposure to weather to grey.

    If it has worn through to bare steel it really needs regalvanising, which becomes a major job as it needs to be removed and refitted. Accordingly, in many restorations they are painted with something that looks a bit like galvanising - hammertone grey, aluminium, cold galvanising.

    Hope this helps,

    John
    John

    JDNSW
    1986 110 County 3.9 diesel
    1970 2a 109 2.25 petrol
    Reply With Quote Reply With Quote
  3. 10th February 2013, 09:08 PM #3
    Series3 GT's Avatar
    Series3 GT
    Series3 GT is offline Master
    Join Date
    Mar 2012
    Location
    Porongurup Western Australia
    Posts
    332
    Total Downloaded
    0
    Get a can of Cold Gal from bunnings, basically paint with a bit of zinc in it that looks like proper galvanising but a lot cheaper but not as protective.
    Reply With Quote Reply With Quote
  4. 10th February 2013, 09:24 PM #4
    mick88's Avatar
    mick88
    mick88 is offline Lord Jock
    Join Date
    Jan 1970
    Location
    Irymple, Victoria, Australia
    Posts
    2,902
    Total Downloaded
    0
    I got mine regalvanised at a place in Adelaide (Korvest) for a reasonable price. They did a top job. I live 400 kays away and picked the goods up so that I could pack it properly and it wouldn't rub on the journey home. Probally a bit hard for you living in the Alice.
    The other option is buff them up with vinegar, I am told "home brand" does the best job (probaly a higher PH).

    Cheers, Mick
    1974 S3 88 Holden 186.
    1971 S2A 88
    1971 S2A 109 6 cyl. tray back.
    1964 S2A 88 "Starfire Four" engine!
    1972 S3 88 x 2
    1959 S2 88 ARN 111-014
    1959 S2 88 ARN 111-556
    1988 Perentie 110 FFR ARN 48-728 steering now KLR PAS!
    REMLR 88
    1969 BSA Bantam B175
    Reply With Quote Reply With Quote
« Spotted in Bargara | Advice wanted - rebuild or just change con rod bearings? »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!