Results 1 to 4 of 4

Thread: front oil seal early 2.25l donk

  1. #1
    Join Date
    Apr 2002
    Location
    Godwin Beach 4511
    Posts
    20,688
    Total Downloaded
    32.38 MB

    front oil seal early 2.25l donk

    what a merry chase!

    starts out as part number 213744

    goes to ERC7987

    then ERR1632

    and ends up being current at ERR6490 it seems

    same seal used on all four and eight cylinder engines...

    cheap version is $3.00 dear version is $25+ it seems

    any of you fine upstanding people know the dimensions / specs on the dear little thing ?
    2007 Discovery 3 SE7 TDV6 2.7
    2012 SZ Territory TX 2.7 TDCi

    "Make the lie big, make it simple, keep saying it, and eventually they will believe it." -- a warning from Adolf Hitler
    "If you don't have a sense of humour, you probably don't have any sense at all!" -- a wise observation by someone else
    'If everyone colludes in believing that war is the norm, nobody will recognize the imperative of peace." -- Anne Deveson
    “What you leave behind is not what is engraved in stone monuments, but what is woven into the lives of others.” - Pericles
    "We can ignore reality, but we cannot ignore the consequences of ignoring reality.” – Ayn Rand
    "The happiness of your life depends upon the quality of your thoughts." Marcus Aurelius

  2. #2
    sheerluck Guest
    I think I've got a brand new spare in the garage you can have if you want it Inc. Or do you just want the measurements for reference?

  3. #3
    Join Date
    Apr 2002
    Location
    Godwin Beach 4511
    Posts
    20,688
    Total Downloaded
    32.38 MB
    just wanted the specs at this stage, thanks

    and thought i would list it to save someone the same frustration if they were looking for the right seal..

    seem the one on madge has collasped so was doing some research getting prepared to do the job.

    next i have to find out if the front pulley etc is the same as the later variant....
    2007 Discovery 3 SE7 TDV6 2.7
    2012 SZ Territory TX 2.7 TDCi

    "Make the lie big, make it simple, keep saying it, and eventually they will believe it." -- a warning from Adolf Hitler
    "If you don't have a sense of humour, you probably don't have any sense at all!" -- a wise observation by someone else
    'If everyone colludes in believing that war is the norm, nobody will recognize the imperative of peace." -- Anne Deveson
    “What you leave behind is not what is engraved in stone monuments, but what is woven into the lives of others.” - Pericles
    "We can ignore reality, but we cannot ignore the consequences of ignoring reality.” – Ayn Rand
    "The happiness of your life depends upon the quality of your thoughts." Marcus Aurelius

  4. #4
    sheerluck Guest
    OK, so I have an ERR6490 in front of me.

    Outside diameter 63mm
    Inside diameter 49mm
    Depth (outside edge) 9mm
    Depth (inside edge) 10mm

    Low res photos attached

    Just shout if you want it, and I'll bung it in the post.
    Attached Images Attached Images

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!