Reply With QuoteI would say replace it, Unless you can weld cast iron or know of a good welder of same. Be easier to find another housing I think.
Cheers Scott
Master
So whilst doing the front seal part of the front cover is broken. Looks like it's been like that for a while. So my question is, do I need a replacement or will a bit of stag (or something else fix it?
I would say replace it, Unless you can weld cast iron or know of a good welder of same. Be easier to find another housing I think.
Cheers Scott
RoverLord
the bit that has broken off is only a mount brace. if you clean it up and use something like devcon to hold it in place when the bolt is tightened up it will still transfer pressure from the head of the bolt down onto the casting as intended.
I would degrease it thoroughly, hit it with some phosphoric acid clean it off use some devcon or metal glue and then paint it once its all setup.
Dave
"In a Landrover the other vehicle is your crumple zone."
For spelling call Rogets, for mechanicing call me.
Fozzy, 2.25D SIII Ex DCA Ute
TdiautoManual d1 (gave it to the Mupion)
Archaeoptersix 1990 6x6 dual cab(This things staying)
If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
If you think you're in front on the deal, pay it forwards.
Posting Permissions
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks