Thread: Glazing Channel

G'day All,
Replacing window seals on 1966/2A SWB; ATM during lock-down in Sydney.

"Rubber Online" has profile 39-8517R (metal side gap 1 to 2mm, Glass side gap 3 to 5mm and 6mm gap between.) for $7 a cut metre including locking key and use Australia Post to ship. I bought 12 metres to make sure I had enough. I used my curved cable cutters to make a nice clean cut. I used laundry detergent and water mix applied as you go with a paint brush. Plenty of YouTube videos to watch on how to start getting the glass in. Gunson 77136 has an excellent set of tools to do the job.
39-8517R Windscreen Rubber

Fresh Australian made rubber and is an excellent fit.

Thank you for this thread.
Chris

Originally Posted by Busted Syncro

G'day All,
Replacing window seals on 1966/2A SWB; ATM during lock-down in Sydney.

"Rubber Online" has profile 39-8517R (metal side gap 1 to 2mm, Glass side gap 3 to 5mm and 6mm gap between.) for $7 a cut metre including locking key and use Australia Post to ship. I bought 12 metres to make sure I had enough. I used my curved cable cutters to make a nice clean cut. I used laundry detergent and water mix applied as you go with a paint brush. Plenty of YouTube videos to watch on how to start getting the glass in. Gunson 77136 has an excellent set of tools to do the job.
39-8517R Windscreen Rubber

Fresh Australian made rubber and is an excellent fit.

Thank you for this thread.
Chris

Good price, I had to buy a 30mtr roll of each.

I was dealing direct with the extruder, I wonder where Rubber Online source it ??


Colin