-
Finally found some time to have a look for my gearbox problem, after I removed the drivers floor I noticed the red lever seemed loose and wobbly. Not sure why perhaps perhaps I’ve lost the spring clip on the knuckle but it did move forward a bit ........maybe and it’s maybe I knocked it into neutral which would explain the wirring but no movement when the clutch was let out.
I went for a drive to heat up the gearbox oil all gears were fine and no jamming in first or reverse very odd. Drivers floor is just sitting loose now I will pull the tunnel and passenger floor to see if something is amiss with selectors and a cause of the jamming problem and why red lever is loose.......things mightn’t be as bad as I first thought[thumbsupbig]
Cheers Paul
-
2 Attachment(s)
