Page 6 of 7 FirstFirst ... 4567 LastLast
Results 51 to 60 of 61

Thread: Series II engine strip down

  1. #51
    Join Date
    Apr 2002
    Location
    Godwin Beach 4511
    Posts
    20,688
    Total Downloaded
    32.38 MB
    Busy in other areas at the moment.....
    2007 Discovery 3 SE7 TDV6 2.7
    2012 SZ Territory TX 2.7 TDCi

    "Make the lie big, make it simple, keep saying it, and eventually they will believe it." -- a warning from Adolf Hitler
    "If you don't have a sense of humour, you probably don't have any sense at all!" -- a wise observation by someone else
    'If everyone colludes in believing that war is the norm, nobody will recognize the imperative of peace." -- Anne Deveson
    “What you leave behind is not what is engraved in stone monuments, but what is woven into the lives of others.” - Pericles
    "We can ignore reality, but we cannot ignore the consequences of ignoring reality.” – Ayn Rand
    "The happiness of your life depends upon the quality of your thoughts." Marcus Aurelius

  2. #52
    Join Date
    Jan 1970
    Location
    Canberra
    Posts
    18,616
    Total Downloaded
    0
    Repco would be the absolute last place I would be getting parts from - might as well as get them from Supercrap.

    Repco - poor service, expensive, rarely have what you want and if you order parts they should have in stock you get charged a delivery fee as well.

    You can do better.

    Garry
    REMLR 243

    2007 Range Rover Sport TDV6
    1977 FC 101
    1976 Jaguar XJ12C
    1973 Haflinger AP700
    1971 Jaguar V12 E-Type Series 3 Roadster
    1957 Series 1 88"
    1957 Series 1 88" Station Wagon

  3. #53
    Join Date
    Oct 2014
    Location
    Northern NSW.Australia
    Posts
    2,023
    Total Downloaded
    0
    We must be very lucky with our Repco in Murwillumbah, Garry.
    Quite the opposite.

    whitehillbilly

  4. #54
    Join Date
    Aug 2006
    Location
    Gold Coast QLD
    Posts
    1,746
    Total Downloaded
    0
    Quote Originally Posted by incisor View Post
    time will tell the tale with the parts.. apparently repco can be pretty handy ...

    as for the plug, it was a fine example of a bush mechanic keeping something going i would say
    Try All Fours 4x4 at Kotara outside Newcastle. His online shop seems to have a lot of old series parts for rebuilds

    http://www.allfourx4.com.au/epages/s...1_2A__3/Engine
    1964, S2a SWB "Ralph"
    1977, S3 SWB "Smeg" (Gone)
    1996 D1 300tdi auto (Gone)
    1973 Rangie Classic (Gone)
    2012, 110 (Series 12) Puma "The Tardis"
    1962 109" Tray Back "Ernie"
    1998 D1 300tdi (Dizzy)
    2017 Kawasaki Versys 1000

    You must now cut down the tallest tree in the forest... With... A HERRING!!!!!

  5. #55
    Join Date
    Aug 2006
    Location
    Gold Coast QLD
    Posts
    1,746
    Total Downloaded
    0
    Quote Originally Posted by whitehillbilly64 View Post
    We must be very lucky with our Repco in Murwillumbah, Garry.
    Quite the opposite.

    whitehillbilly
    Watching this with much anticipation as I am about to embark on a 2-1/4 rebuild myself. I find the Repco stores a bit hit and miss here on the Goldie, but with M/Bah, I think if it is owned by a local in a smaller town, there is a lot more customer service than in larger cities. I find the one near my parents place in Sydney live up to their Rip Every Poor Customer Off reputation, whenever I get dragged into fixing a car down there. The one near me once tried to charge me $48 for a uni joint for my 2a, Said he had 8 of them as NOS, but ended up paying $28 each after a bit of "Your kidding aren't you, a uni joint is not $48". He then tried to sell me all 8 as he didn't want them.
    Cheers Ian
    1964, S2a SWB "Ralph"
    1977, S3 SWB "Smeg" (Gone)
    1996 D1 300tdi auto (Gone)
    1973 Rangie Classic (Gone)
    2012, 110 (Series 12) Puma "The Tardis"
    1962 109" Tray Back "Ernie"
    1998 D1 300tdi (Dizzy)
    2017 Kawasaki Versys 1000

    You must now cut down the tallest tree in the forest... With... A HERRING!!!!!

  6. #56
    Join Date
    Oct 2014
    Location
    Northern NSW.Australia
    Posts
    2,023
    Total Downloaded
    0
    Hi Ian.
    Yes, classic, cousin of a friends brother, small town, who you know.
    Believe you know Macca, from Chillingham. Wedding best man or something.
    Macca was our outdoor education centre, Chef for a bit, and your name, I think, came up, regard LR world.

    whitehillbilly

  7. #57
    Join Date
    Aug 2006
    Location
    Gold Coast QLD
    Posts
    1,746
    Total Downloaded
    0
    Quote Originally Posted by whitehillbilly64 View Post
    Hi Ian.
    Yes, classic, cousin of a friends brother, small town, who you know.
    Believe you know Macca, from Chillingham. Wedding best man or something.
    Macca was our outdoor education centre, Chef for a bit, and your name, I think, came up, regard LR world.

    whitehillbilly
    Hi whitehillbilly

    I know Macca well, I wasn't his best man but I was at the wedding.
    Know the outdoor centre, helped them with some air cond requirements
    a few yrs ago. M/Bah is a small place isnt it, as you say, everyone knows everyone.
    I worked in Tweed for about 17 yrs and know the whole area very well. Beautiful
    part of the world down there.
    Regards Ian
    1964, S2a SWB "Ralph"
    1977, S3 SWB "Smeg" (Gone)
    1996 D1 300tdi auto (Gone)
    1973 Rangie Classic (Gone)
    2012, 110 (Series 12) Puma "The Tardis"
    1962 109" Tray Back "Ernie"
    1998 D1 300tdi (Dizzy)
    2017 Kawasaki Versys 1000

    You must now cut down the tallest tree in the forest... With... A HERRING!!!!!

  8. #58
    Join Date
    Jan 1970
    Location
    Gold Coast Queensland Australia
    Posts
    6,469
    Total Downloaded
    0
    Repco Currumbin is excellent, it's not a lolly shop, and, I have also had good results with Murbah.
    Safe Travels
    harry

  9. #59
    Join Date
    Apr 2002
    Location
    Godwin Beach 4511
    Posts
    20,688
    Total Downloaded
    32.38 MB
    havent done much other than pour my mix down the bores of late

    too busy with other things sadly...
    2007 Discovery 3 SE7 TDV6 2.7
    2012 SZ Territory TX 2.7 TDCi

    "Make the lie big, make it simple, keep saying it, and eventually they will believe it." -- a warning from Adolf Hitler
    "If you don't have a sense of humour, you probably don't have any sense at all!" -- a wise observation by someone else
    'If everyone colludes in believing that war is the norm, nobody will recognize the imperative of peace." -- Anne Deveson
    “What you leave behind is not what is engraved in stone monuments, but what is woven into the lives of others.” - Pericles
    "We can ignore reality, but we cannot ignore the consequences of ignoring reality.” – Ayn Rand
    "The happiness of your life depends upon the quality of your thoughts." Marcus Aurelius

  10. #60
    Join Date
    Oct 2003
    Location
    Godwin Beach Qld
    Posts
    8,688
    Total Downloaded
    0
    Inc. now has access to a 200ltr plastic drum so he can cook his block in the "Brew" to get what he wants out of the block,which will also include the big-end and main bearing shells and anything alloy.

    cheers

Page 6 of 7 FirstFirst ... 4567 LastLast

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!