Nearly all Series 2/2a you will find in Australia were assembled here. And Australian assembled Series Landrovers have the serial number on the outside of the LH rear spring hanger, at the back of the spring. If readable, the number will give the age using the Calvin on line calculator.
Compliance plates were never fitted to Series 2, being introduced during Series 3 production, but there should be an identification plate on the firewall in front of the gear lever. This is, however, an unreliable guide to identity, as it is only held by four screws and is easily removed or moved between vehicles.
Gearbox or axle serial numbers can give an idea, but these are easily swapped between vehicles, and hence are unreliable.
John
JDNSW
1986 110 County 3.9 diesel
1970 2a 109 2.25 petrol
Bookmarks