Page 2 of 2 FirstFirst 12
Results 11 to 17 of 17

Thread: Long sought after 2A is safe at home

  1. #11
    Lionelgee is offline YarnMaster Silver Subscriber
    Join Date
    Mar 2010
    Location
    Queensland
    Posts
    3,814
    Total Downloaded
    0
    Hello All,

    I had a close and more leisurely inspection of the ambulance after I got home from work today. I had some wins: the front and rear convoy lights were missing in action. I checked the draws inside the ambulance section and they were stored there. Also, a new nylon brake or clutch fluid reservoir still in a genuine Land Rover box.

    The loss: I pulled the engine dipstick out and was greeted by a coating of yoghurt for the full depth of the sump.

    Can someone please let me know where to find the engine number on the 2A engines? Thank you!

    Kind regards
    Lionel

  2. #12
    Join Date
    Apr 2014
    Location
    Blair Athol, Adelaide South Aust.
    Posts
    2,745
    Total Downloaded
    0
    Near the waterpump on the pass side of the engine.

  3. #13
    Join Date
    Jun 2015
    Location
    Bayview NSW
    Posts
    35
    Total Downloaded
    0

    Thumbs up

    Guess that will keep you out of the pubs at night and away from stray women.

    Well done and I'm sure your patience will be rewarded . . . eventually.

  4. #14
    Lionelgee is offline YarnMaster Silver Subscriber
    Join Date
    Mar 2010
    Location
    Queensland
    Posts
    3,814
    Total Downloaded
    0
    Quote Originally Posted by Salt grinder View Post
    Guess that will keep you out of the pubs at night and away from stray women.

    Well done and I'm sure your patience will be rewarded . . . eventually.
    Hello Salt Grinder,

    It will get me out and about chasing parts like a replacement firewall! That is the plan for Friday - this month's RDO.

    It will also involve catching up with other ambulance owners and finding out stuff to add to the "missing parts" list. Then trying to track these elusive parts down for my ambulance.

    Oh, the thrill of the chase

    Kind regards
    Lionel

  5. #15
    Lionelgee is offline YarnMaster Silver Subscriber
    Join Date
    Mar 2010
    Location
    Queensland
    Posts
    3,814
    Total Downloaded
    0

    A little Clearer

    Hello All,

    Today's effort identified possibly part of the issue with steering.

    I disconnected the pitman arm off the steering box and the steering wheel was still locked solid. As in not a hair's breadth of movement.

    Having a very - very rusty bulkhead makes getting the steering box cover off a task in itself. One side of the cover is eaten away along with a couple of nuts. I just have to get the side nut and bolt off and I will have the cover removed. After that I can get at the bolts that secure the steering column to the chassis.

    I still have to check the steering relay. It could be rusted solid as well. Removing the steering relay will be next weekend's task.

    Numerous drives along the beaches around the Sunshine coast and lack of maintenance from a previous owner has certainly made tasks "interesting". I have sprayed lanolin based penetration fluid copiously. None of this using a ratchet loosening off a nut and using your fingers to undo the last couple of threads. The nuts and bolts hang on tight and spanners have to be used until the very last thread is undone.

    I will be buying lots of anti-seize when I put the vehicle back together again. It will make the strange term "regular maintenance"; some thing that has been sadly missing from the vehicle up to now, that much easier.

    Kind regards
    Lionel

  6. #16
    Lionelgee is offline YarnMaster Silver Subscriber
    Join Date
    Mar 2010
    Location
    Queensland
    Posts
    3,814
    Total Downloaded
    0
    Hello All,

    During the long weekend I hooked up the trailer and went for a drive to spot near Rockhampton. I was very fortunate enough to pick up a replacement bulkhead.

    There is some rust in the top of the compound curve in the driver's side A-pillar. The bulkhead also required some panel beating as one of its former owners must have lost a bit of patience during its removal. Still and all I am way-way-way in-front of the currently fitted, rusty, Swiss Cheese bulkhead.

    The replacement bulkhead will require welding of the rust hole and a couple of tears in the metal around the tunnel recess fixed up. The bulkhead will then be sandblasted, primed and painted.

    In other developments: a number of weeks ago I took the pitman arm off to see if the steering box was seized. Yes, it was. I will have a closer look at the steering relay to see if it too is seized solid.

    I have a couple of Series 2A steering boxes and a number of Series 3 steering relays to work with. It will be good to be able to point the ambulance in the direction I would like it to travel along. Namely, steered out of the paddock where it came off the car trailer and have the ambulance manoeuvred closer to a shed.

    Kind regards
    Lionel

  7. #17
    Lionelgee is offline YarnMaster Silver Subscriber
    Join Date
    Mar 2010
    Location
    Queensland
    Posts
    3,814
    Total Downloaded
    0
    Hello All,

    Attached is a photograph of an apparently gutted heater or cooler unit that is fitted above the passenger side windscreen. Can any one identify what is missing from the main central part of the box?


    • Was this climate control unit a common fitting in the era? For example, were they fitted to other types of vehicles such as a bus?
    • Who made them?
    • Are they a locally produced component?
    • What are the component names that I am missing so I can start looking out for them?


    It would be great to have the unit operational again - some day.

    Kind regards
    Lionel
    Attached Images Attached Images

Page 2 of 2 FirstFirst 12

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!