1964 2a Rebuild (Storm)

Nice score in a Bruthen Op Shop after getting acetylene today


Attachment 153025 Attachment 153026

Cheers Paul

Quote:

---

Originally Posted by bemm52

Made a bit of progress with bulkhead

Attachment 152978 Attachment 152979 Attachment 152980

Shelf screwed in position ran out of acetylene [bigsad] so will weld later


Attachment 152981 Attachment 152982 view from front worked out well Attachment 152983

Attachment 152984


Cheers Paul

---

Braver than me i can tell you[emoji106] [emoji106]

First coat of paint, hybrid 2a/3 bulkhead went to the Opal build this ones genuine 2a[bigsmile1]

Attachment 153176 Attachment 153177

Cheers Paul

Storms old chassis and rusty bulkheads heading to tip (bikes are for tip shop)

Attachment 153248 Attachment 153249

Nanny state Victoria requires me not only to secure my load but cover it as well what a joke:rulez:

Cheers Paul

Qld is yyhe same but you would get booked here for using that net . In Qld the holes have to be smaller than your fist.

Finally got brakes and clutch bled and fitted fuel tanks...2 x 16 gallons should get me to the shops and back [bigsmile]

Attachment 155561 Attachment 155562

Need to get the tub done to align bulkhead

Attachment 155563 Attachment 155564 Swiss cheese

Got fluids at mates rates [thumbsupbig]

Attachment 155565 Attachment 155566 5W 40 is for our Pumas when I can workout how bottom bung works....looks a bit like a ring pull or stubby lid

Cheers Paul

Finally got brakes and clutch bled and fitted fuel tanks...2 x 16 gallons should get me to the shops and back [bigsmile]

Attachment 155561Attachment 155562

Need to get the tub done to align bulkhead

Attachment 155563Attachment 155564 Swiss cheese

Got fluids at mates rates [thumbsupbig]

Attachment 155565Attachment 155566

Quote:

---

Originally Posted by bemm52

Finally got brakes and clutch bled and fitted fuel tanks...2 x 16 gallons should get me to the shops and back [bigsmile]

Attachment 155566 5W 40 is for our Pumas when I can workout how bottom bung works....looks a bit like a ring pull or stubby lid

Cheers Paul

---

Love the white tips on the fan blades....

Have you got the Changeover Two way tank valve for these? If not, I may be able to help you with that.

BTW, I understood the Standard tanks were normally 10 gallons each. Have never heard of 16 gallon tanks but I'll stand corrected if that is the case.


Edited for tank capacity.

Quote:

---

Originally Posted by bemm52

Storms old chassis and rusty bulkheads heading to tip (bikes are for tip shop)

Attachment 153248 Attachment 153249

Nanny state Victoria requires me not only to secure my load but cover it as well what a joke:rulez:

Cheers Paul

---

In Qld the holes in that net are too large can't have holes bigger than your fist.:rulez: