Results 1 to 2 of 2

Thread: Series II 88 Ute Engine number

  1. #1
    Join Date
    Jun 2012
    Location
    Tharwa
    Posts
    29

    Series II 88 Ute Engine number

    Hi All seeking info on where the serial number is and the engine number? I think this is a 2.25L.

    Is the serial number on the gearbox tunnel cover? Cant find an engine number? Look forward to advice.

    Not to forget, Need a 8 bolt water pump, the rare type , anyone know where to get one? I'm seeing 2 different 8 bolt configurations, is that right. My Parts list shows only one 8 bolt type for SII for 2L and one for the 2.25L . Advice greatly appreciated. NH.

  2. #2
    Join Date
    Jan 1970
    Location
    Irymple, Victoria, Australia
    Posts
    2,774
    The engine number on two and a quarter engine is at the front left of the engine block just
    below the front bottom exhaust manifold stud.
    The engine number is arranged vertically on a flat section of the engine block.

    The vehicle or chassis number will most likely be on the rear left spring hanger, as well as
    stamped on an aluminium plate fixed to the firewall/bulkhead, directly in front of the gear lever.
    If the vehicle has a heater, the plate will be fixed to the dash, "most likely" to the right of the
    steering column.
    If the vehicle was not an Australian CKD import, the chassis number may be on the front right
    spring hanger.

    Confused yet?

    Hope this helps.
    Cheers, Mick.
    1974 S3 88 Holden 186.
    1971 S2A 88
    1971 S2A 109 6 cyl. tray back.
    1964 S2A 88 "Starfire Four" engine!
    1972 S3 88 x 2
    1959 S2 88 ARN 111-014
    1959 S2 88 ARN 111-556
    1988 Perentie 110 FFR ARN 48-728 steering now KLR PAS!
    REMLR 88
    1969 BSA Bantam B175

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!