Rear Diff Broken

Hi guys,

I’m now finally back in to the Landrover after moving house and waiting for parts from the UK.
I ended up sourcing a new carrier for the rear diff and have that all back together and have just about finished the rear axle.

My question is about the rear wheel bearings. I only have one driving member with an oil fill hole, so I packed the bearings and hubs with grease. I then thought about it, and realised oil can still get there as there’s no seal....so I then took the grease out of the hubs, but left it in the bearings.
Then I read the manual that states to pack the bearings and hubs with grease unless they are oil filled 🤯.
Just wanted to know what everyone else does before I pull the hubs off again...?

https://uploads.tapatalk-cdn.com/202...d7e82bebb4.jpg

Grease the bearings to ensure they are lubricated before the oil gets there. Check the diff oil level after a few kilometres.

Thanks John...I was hoping that was the answer!
I’ll now move on to the front diff and axle...