Originally Posted by
Gippslander
Seeking assistance on setting up my Stromberg carburettor main jet, my car is a Series 2A 2.25 came with a Holden carburettor and I have set it up as I would for a Holden Grey motor. I haven’t changed the jets just cleaned it and set float level, the engine is running very rich so I was wondering if anyone has installed a stromberg to their car and what jets were installed. Or would I be better fitting an adjustable main jet.
Interesting. Holden Greys are around the same displacement as the Series, one a bit smaller and one a bit larger. I would have thought that a similar jet size would be fine.
I don't remember; is the jet size marked on the jet? I have a Stromberg here from my SIII. If all else fails I could take it apart for a look. I was going to put a kit through it at some stage anyway. It's not high on my list but I'd do it if it helps.
Very long time since I looked inside a Stromberg.
JayTee
Nullus Anxietus
Getting involved in discussions is the best way to learn.
2000 D2 TD5 Auto: Tins
1994 D1 300TDi Manual: Dave
1980 SIII Petrol Tray: Doris
OKApotamus #74
Nanocom, D2 TD5 only.
Bookmarks