Thread: Series 2a, diff lock and stronger diff/axle

Originally Posted by Dante

Hm ... I thought that the army had used Salisbury diffs on 2a's. But I wouldn't really know.

How do I tell the difference.

Would you upgrade the axels (eg more splines)?

Thanks,
Dante

The Salisbury didn't exist until the SIII. One-ton IIAs (but not military) had ENV diffs, which were quite big and strong.

Salisbury - note bolt-on diff pan (diff centre is integral with axle tubes)

Originally Posted by isuzurover

The Salisbury didn't exist until the SIII. One-ton IIAs (but not military) had ENV diffs, which were quite big and strong.

.....

Sorry to have to disagree with you - the 2a parts book lists the ENV axle as optional (not just on One Tons) , but the Salisbury as standard on 109s from suffix H onwards. (not that I have ever seen a 2a with an original Salisbury, although the conversion is fairly common)

John

Dante,
The Mcnamara manual diff lock is the way to go if you are on a budget (who is'nt?) and are happy to jump out and lock/unlock the thing all the time between 4wd sections. I got a bit lazy once and did'nt bother and the SWB headed bush as the steering can get innefectual at speed.- see photo.
I agree with Craig Murray that it would only be with extra power that you would need to upgrade other components before looking at axles, its actually the crownwheel and diff centre/housing that is the next weakest item. I am speaking from experience as I stripped both a crownwheel and cracked a centre housing, ( different trips) but I was running a 186 pepped up a bit.
I also had to accept that they came from an old farm hack series vehicle. so it was a bit much to ask.

Originally Posted by JDNSW

Sorry to have to disagree with you - the 2a parts book lists the ENV axle as optional (not just on One Tons) , but the Salisbury as standard on 109s from suffix H onwards. (not that I have ever seen a 2a with an original Salisbury, although the conversion is fairly common)

John

I had a H suffix 2A wagon and it had not only a Salisbury diff but metric wheel studs and a synchro gearbox, it was one of the last 2As made.

At the Land Rover 50th at Cooma in 1998 there were a couple of other H suffix 2As so there are some about.

Jeff

I forgot to add, it used to wear out drive flanges. In fact all three Salisburys have worn them. On the 2A wagon they were welded to the axles and I didn't notice for quite a while, even when the weld cracked and it was only driving on the jagged crack line of weld.
I have thought of replacing the flanges on my Defender as I tow a lot and was told by Jack MacNamara they wear out if you do but I am only on my second set of flanges in 130 000 km.

Jeff

Hi Guys,

Depends what military 2a it was. If it was a GS it would have either had the Rover or NVA diff. If it was a 2a workshop vehicle, it would have been retrofitted with a Salisbury diff (as they all were).

Maxidrive do a maxidrive for the Salisbury more $$ but better than the McNamara, have one fitted in a 2a workshop, which gives you uprated axles and flanges, so no more wearing out of drive flanges.

Tony

[QUOTE=tony;512881]Hi Guys,

Depends what military 2a it was. If it was a GS it would have either had the Rover or NVA diff. If it was a 2a workshop vehicle, it would have been retrofitted with a Salisbury diff (as they all were).

I don't think they all were. I know of one that I used to see in the late years of it's military career and I know the person who bought it when it was demobbed and it was always a Rover type diff.